Tamiya Offroad Special DF-03A Mitsubishi Lance EVO X with Extreme X605 Li-Po Balance Charger #CB0292 (Discontinued)
Our Price: Low Price: USD$239.00
Stock: Out of Stock!
Buy this item and earn 239 points valued at USD$0.96.
Tamiya (#58380) 1:10 DF-03 Keen Hawk W/O ESC EP x 1 Pc
Combo Price Now at USD$199.9
Tamiya (#58440) 1:10 DF03RA Mitsubishi Lancer Evo X W/ESC EP
After a full model change, the Mitsubishi Lancer Evolution X was unveiled to the world in 2007. As well as being Mitsubishi's flagship model, the visually impressive Evo. X featured many new outstanding technological aspects which attracted much attention. The newly developed 2 liter 4 cylinder DOHC aluminum block turbo-charged engine provides great weight savings and thumps out 280ps and 43kg/m of torque. Also a first for Japanese cars,the Evo. X features a Twin Clutch SST automated manual transmission which allows a smooth and swift gear change, making driving more enjoyable. The sporty body also features a distinctive front end and a large rear wing.
RC 1:10, Car, Electric-Powered, On Road
This is a 1/10 R/C assembly kit of the Mitsubishi Lancer Evolution X.
Suspension system has plenty of suspension stroke allowing dynamic driving on both on-road and off-road surfaces. Rally tires included.
Shaft driven 4WD chassis with longitudinally mounted motor.
Features the proven DF-03 drive train with front and rear ball differentials and full ball bearings.
CVA Damper Super Mini for front and rear suspensions.
2 types of rear suspension arms allow wheelbase adjustment, enabling fitting of short wheelbase (251mm) bodies as well.
Upper arms feature threaded shafts enabling camber angle adjustments.
ESC and type 540 motor included.
Choice of 3-gear ratios: 8.22:1, 7.90:1, 7.45:1, 7.16:1
Includes two spur gears (78T, 75T) and two pinion gears (29T, 32T)
For an ultimate finish, paint your machine with PS Evolution Red (Item 89919).
Can be used with a variety of Option Parts, including:
53571 TRF Damper Set (Fluorine Coated) -53949 DF-03 Lightweight Battery Stopper Pin
53953 DF-03 Front One-Way Set
53931 DF-03 Center One-Way Set
53941 DF-03 Alu. Turnbuckle Steering Rod
53792 Assembly Universal Shaft
53924 DF-03 Heat Sink Bar Set
53948 DF-03 Alu. One-Piece Propeller Cup Joint
53925 DF-03 Slipper Clutch Set (Includes a 85T spur gear that can not be used.)
Tire Width / diameter = FR 27/69mm
Tamiya DF03RA Chassis
Body (with rear wing and light bracklet) (1pc)
Wheels and Tires (4pcs)
Radio: 2-Channel (1Pc)
Servo For 1:10 (1Pc) Size around 40.4 x 19.8 x 36mm
Battery: Sub-C 6-cells or Li-Po 2Cells Stick Packs with standard Tamiya connector
Charger for car battery: For Ni-Mh Sub-C/ Li-Po 2Cells Stick Packs
Paint: PS for Polycarbonate/TS for ABS
Items Required (not included)
1 X (2ch) Transmitter
1 X (2ch) Receiver
1 X Steering Servo (Standard Size)
7.2v Sub-C or 7.4V Li-Po
1 X Battery Charger
TX Battery -
8 X 2AA battery
Building and track equipment
Instant Cement -
Sorry!Out of stock!!!
Hop Ups Parts -
Hop Ups Parts for DF03
Hop Ups Parts -
Hop Ups Parts for DF03RA
Extreme (#X-605) Li-Po Balance Charger
High Performance Microprocessor:
eXtreme X-605 Balance Charger is a rapid charger with a high performance microprocessor.
Internal independent lithium balancer:
X-605 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
Adaptable to various types of lithium battery:
X-605 is adaptable to various types of lithium batteries, such as as Li-ion, LiPo and the new LiFe series of batteries.
Maximum safety:The automatic charge termination program is based on the principle of the Delta-peak voltage detection.
The upper limit of the charging current can be set up when charging NiCd or NiMH battery.
If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect.
The maximum five batteries’ data can be stored for users’ convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
Optimized operating software
X-605 features the so-called AUTO function that set the feeding current during the process. It can prevent the overcharging. It can disconnect the circuit automatically and alarm once detecting any malfunction. The programs are controlled through two way linkage and communication, to achieve the maximum safety and minimize trouble.
Balancing individual cells battery discharging:
During the process of discharging, X-605 can monitor and balance each cell of the battery individually. Error message will be indicated and the precess will be ended automatically if the voltage of any single one cell is abnormal.
Fast and storage mode of lithium battery:
Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ’store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Temperature threshold (optional):
The battery’s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
Input power monitoring:
To protect the car battery used as DC input power from being damaged, its voltage keeps being monitored. If it drops below the lower limit, the process will be ended automatically.
operable for battery refreshing and balancing to stimulate the battery’s activity.
Operating voltage range: DC 11.0 ~ 18.0 Volt , AC to DC adaptor (DC11.0 ~ 18.0V/5A)
Circuit power: Max. charge power 50W , Max. discharge power 5W
Charge current range: 0.1 ~ 5.0A
Discharge current range: 0.1 ~ 1.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd/NiMH battery cell count: 1 ~ 15cell
Li-ion/Polymer cell count: 1 ~ 6 series
PB battery voltage: 2V ~ 20V
Weight: 277g (Net Weight)
Dimensions: 133 x 87 x 33mm
Li-Po Balance Charger (1 Pc)
Wire (1 Set)