This powerful charger is made by Eagle Model Co. It can charge 1 to 10 cells at the same time with max. 6000mAh. The charger provide four charging modes: Normal Peak, Fuzzy Logic, Partial and Boosting, depending on your purpose, you can choose different charging modes.
||Use this mode for all standard charging applications. You can setup the unit to perform one peak or two peaks. You can setup the auto repeak delay time within the USER SETUP MODE. To turn off the 2nd peak, set the repeak delay time to zero.
||This charge mode is especially useful for packs with a partial charge. The unit would first discharge your pack according to your preset discharge rate and then fully charge your pack.
|Partial:||Use this mode only for Ni-MH cell(s). Certain Ni-MH batteries require a partial charge for long term storage. You can program the amount of partial charge in the USER SETUP MODE. 10 to 30% usually good for Ni-MH battery.
||This mode is developed for racing application. You can get the most capacity and power from your batteries using this boosting function. The unit first partial discharge your pack momentarily follow by a preprogrammed fast charge, this increase battery temperature as well as it's overall voltage output. We suggest that you only use this boosting feature when your pack is cool. Never use the Boosting function when your pack is still warm.
||2x16 characters INDIGO Blue backlit LCD display
||Surface Panel Type Battery
||On/Off 1-60 Minutes (1minute step)
||10-50% (10% step)
||6 Ring Tones (user selectable)
||6.14"x 4.80"x 1.77" (15.6x12.2 4.5cm)
|Input Voltage(Power Source):
||11.5-15 Volts DC
|Charge Battery Capacity:
||50-6000mA (50mA step)
|Charge rate(Super linear):
|Auto Trickle Value Discharge Rate:
||3-20mV/cell for Ni-CD, 3-15mV/cell for Ni-MH
||1-9 times (1 time step)
|Delay Time For After Charge:
||1-10 Minutes (1 Minutes step)
|Delay Time For After Discharge:
||1-60 Minutes (1 Minutes step)
Size:20.5 x 17.3 x 6.5cm