RC Media | RC News & Products updates

Xray 2013 spec RX8 1/8th scale chassis

Xray has just released details on their 2013 spec RX8 1/8th scale on road chassis! The new chassis has included a number of major changes!

New features:

• All new fuel tank with interior baffles for stable engine performance.
• Low profile shocks and related lower shock towers.

The new LP shocks were developed to lower the CG of the car in order to improve stability. With the new LP shocks the RX8 stays flatter, making it easier to drive in chicanes and more resistant to traction roll, letting you carry more speed through high traction sweepers. The other major change is the all-new reverse clutch set whose design provides smoother and faster acceleration, while increasing the lifetime of the clutch shoe.

Xray T4 Aluminum Lower Suspension Holder Orange XR-302049-O

CNC-machined alu lower suspension holder which is part of suspension holder system allows suspension arms to be mounted independently from the diff bulkheads. Orange color.

Item no.: XR-302049-O

 

Xray 50mm Drive Shaft – Hudy Spring Steel for T2 T3 T4 XR-305323

CNC-machined 50mm drive shaft for XRAY T2, T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.

Item no.: XR-305323

 

Xray Anti-Roll Bar Rear 1.5mm for T4 XR-303495

 

The T4 rear anti-roll bars for narrowed bulkheads for super-fine tuning. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate bar thickness) for easy and instant recognition.

The anti-roll bars are mounted using the included composite holders on the bulkheads, and to the integrated anti-roll bar mounts on the suspension arms.

Item no.: XR-303495

Xray Composite Dual Servo Saver Arm for T3 T4 #XR-302526

Set of 2 molded arms for dual servo saver, made form tough composite material. Set of left and right arms.

Item no.: XR-302526

 

Xray Composite C-Hub Right 2 degree – Medium – Rubber Spec for T2 T3 T4 #XR-302361

This is a optional XRAY Molded Composite Medium Rubber-Spec 2° Right Side C-Hub, and is intended for use with the XRAY T2 family of vehicles. This Molded composite C-hub for the right side steering block has a pre-set caster angel of 2°. Medium rigidity for rubber-tire racing. Use with matching left-side C-hub #XR-302362.

This C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly, and the large openings prevent binding of the CVD in serious crashes.

The C-hubs are available in all standard caster angles and are also available in two different rigidities that are optimized for particular racing conditions. The EU Edition includes medium rigidity (M) C-hubs specially optimized for rubber-tire racing, while the US Edition includes hard rigidity (H) C-hubs specially optimized for foam-tire racing.

Item no.: XR-302361

 

Xray Composite C-Hub Left 2 degree – Medium – Rubber Spec for T2 T3 T4 #XR-302362

This is a optional XRAY Molded Composite Medium Rubber-Spec 2° Left Side C-Hub, and is intended for use with the XRAY T2 family of vehicles. This Molded composite C-hub for the right side steering block has a pre-set caster angel of 2°. Medium rigidity for rubber-tire racing. Use with matching right-side C-hub #XR-302361.

This C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly, and the large openings prevent binding of the CVD in serious crashes.

The C-hubs are available in all standard caster angles and are also available in two different rigidities that are optimized for particular racing conditions. The EU Edition includes medium rigidity (M) C-hubs specially optimized for rubber-tire racing, while the US Edition includes hard rigidity (H) C-hubs specially optimized for foam-tire racing.

Item no.: XR-302362

 

Xray Ball End 4.9mm w/ Thread 6mm for T2 T3 T4 #XR-302653

Threaded 4.9mm ball end with 6mm thread for rear suspension on T2 family of cars to replace the ball + screw assembly. These balls are great for use with Xray closed composite ball joints #XR-302661 but also work with standard open ball joints.

Item no.: XR-302653

 

Xray Anti-Roll Bar Front 1.3mm for T4 #XR-302493

This is a replacement XRAY 1.3mm Front Anti-Roll Bar, and is intended for use with the XRAY T4 1/10 scale electric touring car. This is the stock front anti-roll bar.

Item no.: XR-302493

 

Xray Composite Spur Gear 106T / 64P for T1 T2 T3 T4 #XR-305876

XRAY precision molded offset spur gear 106 tooth, 64 pitch. This spur gear has been strategically lightened to reduce rotating mass.

Item no.: XR-305876

 

Xray 4S Spring – Set C = 2.9 for T4 #XR-308277

The all-new linear 4S springs marked 2.9. 4S springs have been specifically designed to complement the SLP shocks and are 20mm long. Set of 2.

The 4S springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

Item no.: XR-308277

 

Xray Aluminum Lower Suspension Block – Orange for T3 T4 #XR-302045-O

CNC-machined aluminum lower suspension block which is part of all-new suspension holder system allows suspension arms to be mounted independently from the diff bulkheads.

Item no.: XR-302045-O

Xray Aluminum Lower Front Suspension 1-Piece Holder – Orange v2 for T3 T4 #XR-302047-O

The optional 1-piece aluminum suspension holder is a direct replacement for the standard rearward holders of the FRONT suspension. The aluminum suspension holder reinforces the chassis and will help to prevent chassis damage in hard crashes. The aluminum holder will also make the front suspension a bit stiffer and give the car slightly less steering response.

Item no.: XR-302047-O

 

Xray Aluminum Lower Rear Suspension holder – Orange for T4 #XR-302050-O

Optional 1-piece aluminum rear suspension holder is a direct replacement for the standard forward holders of the REAR suspension. This holder is recommended to use for more steering in high grip conditions only, as it increases stability. CNC-machined alu lower rear suspension holder which is part of suspension holder system allows suspension arms to be mounted independently from the diff bulkheads.

Item no.: XR-302050-O

Xray 50mm Drive Shaft – Hudy Spring Steel for T2 T3 T4 #XR-305323

CNC-machined 50mm drive shaft for XRAY T2, T3 made from world-renowned top-secret HUDY Spring Steel™. This race-quality drive shaft is the smallest in the world, exclusively manufactured by HUDY. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.

Item no.: XR-305323

Xray Front Suspension Arm (One Hole) – Graphite for T2 T3 T4 #XR-302167

Molded lightweight composite front lower suspension arm. The specially-formulated graphite composite material allows for a very light suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.

The optimized suspension arm gives improved traction, easier handling, and decreases tire overheating which leads to car stoppage under high-grip conditions. Features a single optimized shock mounting position and integrated anti-roll bar mounts. The graphite arm has same size and geometry as standard 1-hole suspension arm.

Item no.:XR-302167

Xray Graphite Chassis 2.2mm #XR-301134

The new 2.2mm thick chassis is CNC-machined from premium-grade graphite material and provides maximum traction under low traction conditions while maintaining stability and forgiveness under high traction conditions. Specifically designed for LiPo batteries, all electronics are located along the centerline to make this the best-balanced electric touring car.

The high-grade, custom-manufactured carbon graphite is specially produced based on XRAY’s own recipe and specifications.

Item no.:XR-301134

 

Xray Graphite Shock Tower Rear 3.0mm for T4 #XR-303086

CNC-machined rear shock tower made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Lowered by 15mm to help move the CG as low as possible, the shock towers are smaller, lighter, more compact and, after vigorous testing, have been race-tuned.

Item no.: XR-303086

 

Xray Composite Ball Joint 5mm Short Open for T2 T3 T4 #XR-303454

Molded composite 4.9mm ball joints for anti-roll bar links, same as included in anti-roll bar sets #302401 (front) and #303401 (rear).

Item no.:XR-303454

Xray Composite Anti-Roll Bar Holders for T2 T3 T4 #XR-303411

Molded composite anti-roll bar holders, same as included in anti-roll bar sets #302401 (front) and #303401 (rear). Set of 8.

Item no.:XR-303411

Xray Composite Upright 0 degree Outboard Toe-In – Medium – Rubber Spec for T2 T3 T4 #XR-303352

Molded-composite rear upright features built-in 0° of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. Features two roll center positions on the top of the rear upright. Accommodates small but robust 5×10 ball-bearings for minimized unsprung weight.

Medium rigidity (labeled "M") specially optimized for rubber-tire racing.

Use on both left and right sides of the car. Can be also used for foam tires.

Item no.:XR-303352

Xray Composite Rear Suspension Arm (One Hole) – Graphite for T2 T3 T4 #XR-303167

Molded lightweight composite rear lower suspension arm. The specially-formulated graphite composite material allows for a very light yet suspension arm that can withstand the rigors of high-performance racing. Fits XRAY T2, T3 cars.

The optimized suspension arm gives improved traction, easier handling, and decreases tire overheating which leads to car stoppage under high-grip conditions. Features a single optimized shock mounting position and integrated anti-roll bar mounts.

The graphite arm has same size and geometry as standard 1-hole suspension arm.

Item no.:XR-303167

Xray Composite C-Hub Right 4 degree – Hard – Foam Spec for T2 T3 T4

#XR-302373

Molded composite C-hub for right steering block of T2, T3. Caster pre-set at 4°. Hard rigidity for foam-tire racing. Use with matching left-side C-hub #302374. Can be also used for rubber tires.

New C-hub has large openings for quicker & easier assembly/disassembly of CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly, and the large openings prevent binding of the CVD in serious crashes.

The C-hubs are available in all standard caster angles (2°, 4° and 6°) and are also available in two different rigidities that are optimized for particular racing conditions. The EU Edition includes medium rigidity (M) C-hubs specially optimized for rubber-tire racing, while the US Edition includes hard rigidity (H) C-hubs specially optimized for foam-tire racing.

Item no.: XR-302373

 

Xray Composite Dual Servo Saver Arm for T3 T4 #XR-302526

This is a molded arms for dual servo saver, made form tough composite material. Suitable for left and right arms.

Item no.: XR-302526

Xray Ball-Bearing Composite Bushing for T2 T3 T4 #XR-302295

Item no.:XR-302295

 

Xray Composite Steering Block – Hard – V2 for T2 T3 T4 #XR-302253

Molded composite steering block of “hard” hardness (H) for foam-tire racing. The steering block features two Ackermann positions, and uses small but robust 5×10 ball-bearings to minimize unsprung weight. Can be also used for rubber tires. Fits XRAY T2, T3 and T4 cars.

Item no.: XR-302253

 

Xray Composite Shock Ball Joint – Open for T2 T3 T4 #XR-308316

Item no.:XR-308316

Xray Composite Spur Gear 114T / 64P for T1 T2 T3 T4 #XR-305884

XRAY precision molded spur gear. This spur gear has been strategically lightened to reduce rotating mass.

Item no.: XR-305884

Xray Composite Spur Gear 112T / 64P for T1 T2 T3 #XR-305882

Item no.: XR-305882

Xray Composite Spur Gear 84T / 48P – Hard for T1 T2 T3 T4 #XR-305784

Item no.:XR-305784

Xray Composite Offset Spur Gear 108T / 64P for T1 T2 T3 #XR-305878

Item no.: XR-305878

 

Xray Composite Offset Spur Gear 110T / 64P for T1 T2 T3 #XR-305880

Item no.: XR-305880

Xray Composite Offset Spur Gear 104T / 64P for T1 T2 T3 #XR-305874

 

Item no.: XR-305874

Xray Anti-Roll Bar Rear 1.2mm for T4 #XR-303492

Item no.:XR-303492

 

Xray Anti-Roll Bar Front 1.6mm for T4 #XR-302496

Item no.:XR-302496

 

Xray Anti-Roll Bar Front 1.2mm for T4 #XR-302492

This is a replacement XRAY 1.2mm Front Anti-Roll Bar, and is intended for use with the XRAY T4 1/10 scale electric touring car. This is the stock front anti-roll bar.

Item no.:XR-302492

Xray Anti-Roll Bar Front 1.4mm for T4 #XR-302494

Item no.: XR-302494

Xray Anti-Roll Bar Front 1.5mm for T4 #XR-302495

Item no.: XR-302495

Xray Ball Universal 5.8mm Hex #XR-303241

Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four.

Item no.:XR-303241

Xray 007 Ball End 5mm with Thread for T2 T3 T4 #XR-302652

Item no.:XR-302652

Xray 4S Spring Set C =2.5 for T4 #XR-308275

Item no.: XR-308275

 

Xray 4S Spring Set Progressive C = 2.5-2.8 for T4 #XR-308264

Item no.: XR-308264

Xray 4S Spring Set C =2.3 for T4 #XR-308274

Item no.: XR-308274

 

Xray T4 – 2013 Specs 1:10 Luxury Electric Touring Car Kit #300019

This is the XRAY T4, 2013 EU Rubber-Spec Competition 1/10 Scale Electric Touring Car Kit. For almost a full year the XRAY Research and Development team has been designing and refining the T4 chassis. In total, 5 completely different prototype chassis were made and tested all around the world on a variety of surfaces and condition during that time. Whether it was carpet or asphalt, indoor or outdoor, hot or cold conditions, thousands and thousands of laps were run and countless amounts of data was recorded, evaluated and compared.

Of those prototypes, only the best ideas and parts were chosen to be incorporated into the final prototype. This prototype was then hard-core tested for several months by XRAY team drivers all around the world. The drivers all returned with the same results, feedback and conclusion: "This is the best performing, most innovative XRAY touring car that I have ever tested or driven."

With a clear vision and mission in mind, the research team set out to accomplish five main design improvements on the T4:

• Lowered Platform
• Improved Chassis Flex
• Increased Traction
• Improved Steering Characteristics
• Improved Weight Balance

Details:

• Chassis: The T4 features a redesigned chassis specifically designed for all kinds of track conditions. The 2.2mm thick chassis is CNC-machined from premium-grade graphite material and provides maximum traction under low traction conditions while maintaining stability and forgiveness under high traction conditions. Weight distribution and balance characteristics have been enhanced. Due to the increase in LiPo capacity resulting in additional weight and heavier duty electronics to handle the increased power of modern brushless systems, the chassis was designed to allow the weight to move as close as possible to the chassis centerline in order to maintain balance. In addition, the bulkhead mounting holes were narrowed by 6mm to make the mounting points as narrow as possible for more traction and better balance. The front and rear portions of the chassis were strategically redesigned to provide maximum steering and traction. The chassis is an ultra-narrow 94mm wide and features pre-drilled holes for options such as: chassis weights, graphite motor guard and battery strap.

 

• Top Deck: The top deck has been redesigned for the narrow bulkheads. The shape of the rear portion of the top deck has been specifically designed to achieve maximum traction and in corner steering. The top deck is machined from premium-grade 2.0mm graphite. An optional belt tensioner can be mounted to the top deck.

 

 

• Super Low Profile (SLP) Shocks: T4 shock absorbers were completely redesigned and re-engineered. Everything is updated and the shocks are aluminum. The SLP shocks were developed to lower the CG of the car to the absolute maximum in order to improve stability. With the SLP shocks the T4 stays flatter, making it easier to drive in chicanes and more resistant to traction roll, letting you carry more speed through high traction sweepers. SLP shocks feature redesigned shock caps, shock collars, pistons, as well as all redesigned composite parts. The shocks also feature bladders and foam inserts for smoother shock operation. Shock rods have been especially hardened to ensure long life and maximum strength. Updated pistons were also designed and produced. The set of pistons include 3 and 4 hole pistons with 1.0, 1.1, and 1.2mm diameter holes. The pistons are molded using special methods and composites to ensure extreme roundness, while maintaining maximum stiffness and durability. The Super Low Profile shocks are almost 8mm shorter compared to the shocks on the T3. The shock bodies are CNC-machined from premium Swiss 7075 T6 aluminum and hardened to ensure maximum life. The shocks consist of a shortened shock body but with a larger diameter to retain the same volume of oil as the previous, longer T3 shocks.

• Super Short Shock Springs (4S): The 4S springs have been specifically designed to complement the SLP shocks and are 5mm shorter than previous XRAY springs. The T4 comes equipped with C2.7 linear springs in the front to provide maximum stability and steering and C2.3-2.6 progressive springs in the rear to provide maximum traction and cornering speed. The main advantage and benefit of progressive springs is that as the car initially enters the corner they work like a C2.3 spring to provide maximum traction. At the same time, when the chassis begins to roll, in the middle of the corner, the spring rate progressively increases until it works like a C2.6 which allows the car to maintain maximum cornering speed. The 4S springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

 

• Shock Tower: To maximize the effect of the SLP shocks, both front and rear shock towers were completely redesigned and lowered by 15mm to help move the CG as low as possible. Machined from premium-grade 3.0mm graphite, the shock towers are smaller, lighter, more compact and after vigorous testing, have been race-tuned to increase on-power steering.

• Aluminum Bulkheads: To accommodate the ultra-low design of the T4 platform with centralized weight placement, all the bulkheads were completely redesigned. These small and light bulkheads are positioned more to the chassis centerline to provide maximum traction, steering and balance. All bulkhead parts are CNC-machined from premium Swiss 7075 T6 aluminum and have been designed to provide the lightest and strongest possible support framework for the car. All 4 differential bulkheads now share a common design in order to reduce spare parts requirements and increase parts compatibility. The left and right layshaft bulkheads also share a common design and are interchangeable with one another. The bulkheads are anodized in a distinctive orange color. (Note: Color may vary slightly between products.) XRAY’s legendary attention to detail is noticeable in all the precisely chamfered edges.

 

• Motor Mount: The redesigned motor mount has been isolated from the layshaft bulkhead in order to eliminate unwanted tweak. The motor mount is fixed to the bulkhead by two screws and to the chassis via M3 nut providing the tweak free platform. Thanks to this unique design the motor mount has been moved 3mm closer to the chassis centerline, which increases stability and improve balance of the car. The motor mount is CNC-machined from premium Swiss 7075 T6 aluminum.

 

• Upper Bulkhead Clamps: To coincide with the super narrow bulkheads, the upper bulkhead clamps were also redesigned. With 3 different roll center mounting positions, adjusting the roll center of the chassis is quick and easy. The clamp height has been reduced by 2mm compared to the previous platform, which adds additional flexibility for roll center adjustments by allowing you to add or remove shims under the ball studs. In order to keep the same well-proven roll center geometry the roll center positions have been moved outside to offset the narrow bulkhead design.

 

• Bearing Holders: The adjustable bearing eccentric holders were also updated to mate with the narrower bulkheads. As with previous XRAY designs, both front and rear bulkheads feature integrated belt-tension adjustment through the use of adjustable bearing eccentric holders, eliminating the need for a separate belt tensioner while reducing friction and improving drivetrain efficiency.

• Suspension Mounts: The front and rear suspension holders are CNC-machined from premium Swiss 7075 T6 and are fully independent from the bulkheads and mounted directly to the chassis which increases traction and makes the car easier to drive. The front one piece holder has been updated to allow easier access to the steering rack to simplify Ackermann adjustment. The reinforced rear aluminum lower suspension holders are mounted to the chassis with two screws for extra strength and have been moved 0.75mm inboard to narrow the rear track width and provide more in corner steering.

 

• Central Servo Mount: XRAY's own invented and designed central servo mount is now a standard in the T4. This style mount allows the servo to be mounted to the chassis without the servo coming into contact with the chassis plate. This design has been engineered to eliminate tweak and increase overall traction. The Swiss 7075 T6 main aluminum stand is positioned along the chassis centerline for perfectly balanced flex characteristics and holds the high-grade graphite servo plate suspended above the chassis.

 

• Steering Plate: To gain more steering and to improve the direction changes of the car, the steering plate was redesigned to move the connection of the servo linkage into the absolute center of the dual arm steering system and is CNC-machined from premium Swiss 7075 T6 aluminum. The steering plate also works as a mechanical stop for the steering throw, limiting the steering angle to 25 degrees in order to smooth steering response and maintain maximum corner speed.

 

• Servo Savor: The popular XRAY servo saver was improved and updated for the T4. To make the steering linkage adjustment easier additional positions on the servo saver were added. The servo saver consists of 4 springs which makes the servo saver strong enough to provide the precision steering racers demand, while at the same time being flexible enough to prevent servo damage in hard crashes. The servo saver has interchangeable bushings to fit most popular servos.

 

• Anti-Roll Bars: To accommodate the narrowed front and rear bulkheads, updated anti-roll bars were designed. Front 1.4mm and rear 1.2mm anti-roll bars are included in the kit, and a full line of optional anti-roll bars for super-fine tuning is available. For easy recognition the anti-roll bars have laser-engraved stripes (to indicate bar thickness) for easy and instant recognition. The anti-roll bars are mounted using the included composite holders on the front and rear bulkheads, and to the integrated anti-roll bar mounts on the suspension arms. The rear anti-roll bar mounting location was updated on the T4 and is now in a horizontal position for easier accessibility.

 

• Rear Uprights: To improve the stability of the car and to increase cornering speed of the T4 the hard "H" rear uprights are included. The rear uprights feature 0° toe to ensure stability and prevent suspension geometry changes in hard crashes. There are two different roll center positions on the rear uprights, and more roll center positions can be easily adjusted by adding shims between the upright and the turnbuckle ball joint. The rear uprights feature small but robust 5x10x4mm ball-bearings to minimize un-sprung weight. The rear uprights are available in two different material formulations that were specifically blended for particular racing conditions. Also available in medium "M" hardness as an option. 1-hole uprights were developed as an optional fine-tuning part to compliment the standard 2-hole uprights for high-traction tracks where more roll of the car is desired. These 1-hole uprights provide an additional option versus the standard 2-hole upright when the outer hole does not allow enough roll, and the inner hole creates too much roll.

 

• 50mm Rear Drive Shafts: The T4 features 50mm long lightweight aluminum drive shafts machined from premium Swiss 7075 T6, hard-anodized and black coated for stylish looks. The aluminum drive shafts are designed for use in the rear.

 

• Bumper: To improve the body fit as well to lower the CG an updated front from bumper was designed which is 1/3 lower and lighter and manufactured from highly resilient lightweight foam. The lower composite bumper mount and upper bumper holder are molded from rigid composite material to withstand heavy impacts. An optional stiffer foam bumper (XRA301225) as well as an impact-absorbing lower bumper mount (XRA301203) are available as option parts.

 

• XRAY Gear Differential: The T4 gear differential increases on-power steering which is needed on nearly all types of tracks, and is ideal for both carpet and asphalt tracks. The gear differential includes a composite case and cover with pulley. Differential gears are made from tough composite material, precision-molded composite gears combined with light aluminum drive shafts, which create a lighter and super-smooth gear differential. Another key advantage of the gear differential is that it is maintenance-free. When the differential is correctly built, there is no need for maintenance for a very long time… no need for frequent oil changes, and no leakage due to the superior sealing system.

• XRAY Solid Axle: Rotating mass is one of the most significant influences on the performance of an RC racecar. The T4 features a unique lightweight composite XRAY Front Solid Axle. The Front Solid Axle has a very stiff and ultra-light weight structure that was achieved by molding the entire solid axle from XRAY’s own self-formulated composite material. Outdrives are fully exchangeable which allows very easy and comfortable servicing, while the unique drive shaft connection — eliminating the former drive shaft blades — enables direct power transfer to the axle and eliminates play between the drive shaft and outdrives, improving steering precision and increasing overall steering.

 

• Drivetrain: The ultra-efficient and well-proven drive train has been carried over from the T3 platform. The drive ratio is fully suitable for the current high performance brushless motors (both stock and mod) and LiPo batteries. Both the front solid axle and the rear gear differential feature 38T pulleys and the central layshaft features 20T pulleys for an efficient internal ratio of 1.9.

 

• Integrated Belt Tension Adjustment: As with previous XRAY cars, both front and rear bulkheads feature integrated belt-tension adjustment through the use of adjustable bearing eccentric holders, eliminating the need for a separate belt tensioner. These eccentric holders were modified to fit the super narrow position of the bulkheads, while allowing you to still use your existing differentials and spools. All ball-bearings turn in composite hubs to reduce friction and improve drivetrain efficiency.

 

• Differential Height Adjustment: Both front and rear bulkheads feature independent differential height adjustment. By rotating the differential eccentric holders, the height of the differentials can be adjusted by 1mm. Optional eccentric holders with 2mm offset are available which allows differential height adjustment of 2mm.

• Centrally-Positioned Layshaft: The spur and pinion gears have been aligned along the absolute centerline of the chassis to optimize the placement of the polar moment and ensuring ideal balance of the drivetrain components.

• Aluminum Middle Layshaft: The aluminum layshaft is strategically CNC-machined to minimize rotating weight without compromising strength or integrity. The hollow layshaft is perfectly round with zero run out, eliminating drivetrain vibration and producing a positive balance. Composite pulleys key solidly to the layshaft.

 

• Premium Ball Bearings: A full set of 20 high-speed, blue-sealed ball-bearings are used throughout the drivetrain to ensure maximum efficiency. All of the bearings are degreased and oiled with Aero Shell Fluid 12 for maximum smoothness and long life. The bearings used in steering blocks and uprights have been specially selected to reduce un-sprung weight and maximize drivetrain efficiency.

 

• Kevlar Drive Belts: The 2-belt 4WD drivetrain concept provides maximum efficiency and highest performance using Kevlar-reinforced drive belts for ultra-high durability. Narrow (3mm) front and rear drive belts have been ground to minimize thickness and flexibility.

 

• HUDY Spring Steel CVDs: T4 constant velocity drives (CVDs) are exclusively manufactured from special world-renowned, top-secret, self-developed HUDY Spring Steel. The drive shafts are the world‘s tiniest yet most durable drive shafts used in electric touring cars. The drive shafts are strategically lightened to guarantee the lowest possible weight without compromising strength or durability. These specially-lightened drive shafts can only be manufactured from special HUDY Spring Steel which was developed for extreme racing conditions. The drive shafts have been additionally hand-ground for maximum precision and to provide true rotation and unbinding drivetrain operation.

• Super-Lightweight Drive Axles: To reduce rotating weight, the T4 features super-lightweight wheel axles which have the outer diameter specially ground to remove the material while keeping the same strength thanks to the use of HUDY Spring Steel material. The lightweight drive axles reduce rotating mass up to 35% compared to regular drive axles.

• Suspension Holders: The T4 uses the same smart suspension holders as the T3 platform. The aluminum inserts in the composite holders guarantee that geometry and setup will not change and will be retained even after hard crashes. There are 3 different suspension composite holders that enable easy roll center setup. The standard suspension holder gives a 0mm roll center, while two eccentric suspension holders raise or lower the roll center by 0.75mm. The independent suspension holders of the T4 allow for even more precise roll center adjustment. The suspension holders — which are mounted on separate bulkheads — may be shimmed outward from the bulkheads (using 0.1–0.5mm shims) for precise roll center positioning. The smart XRAY geometry uses variable-thickness shims between the bulkheads and suspension holders to enable easy rear toe-in adjustment. However, you can easily remove the shims which will narrow the suspension, and then add wheel offset shims to reclaim track-width.

• Proven Suspension Geometry: From the narrow arms, through the tiny front and rear suspension blocks, to the small and robust steering blocks, every suspension part has been specially designed to provide responsive racing characteristics in all racing conditions. The T4 platform features optimized suspension parts carried over from the T3platform. The arms feature a single optimized shock mounting position and integrated anti-roll bar mounts. The rear arms feature three anti-roll bar mounts for super-fine adjustment of the anti-roll bar.

• C-Hubs: The C-hubs in the T4 are also carried over from the T3 platform and feature large openings for quicker and easier assembly and disassembly of the CVDs. The entire CVD assembly can be easily inserted/removed through the C-hub without the need for disassembly. The large openings prevent collision of CVD with C-hub in serious crashes and are optimized for use with optional ECS drive shafts. The C-hubs are available in all standard caster angles (2°, 4°, 6°) and are also available in two different hardnesses that are optimized for particular racing conditions.

• Steering Blocks: The small and tough steering blocks each feature two Ackermann positions. The front steering blocks also feature small but robust 5x10mm ball-bearings to minimize un-sprung weight. The steering blocks are available in two different hardnesses, which are optimized for particular racing conditions.

• Dual Arm Steering System: The dual arm steering system is supported by 6 ball bearings and runs on aluminum stands. Ackermann is easily adjusted by inserting shims between the steering plate and steering rods. The steering system features a lower mounting position for steering linkage which makes the car handle easier going into corners. Handling is easily adjusted for more aggression by inserting a shim between the steering block and steering rods. The front lower suspension holder has been updated to allow easier access from the front of the car for quick and easy Ackermann adjustment.

• Aluminum Hex Hubs: Ultra-lightweight wheel hex drive hubs are CNC-machined from 7075 T6 black-coated aluminum. These ultra-true hex hubs are specially machined to reduce rotating weight while guaranteeing wobble-free wheel mounting. Optional offsets are available (-0.75, +0.75, +1.5mm).

• Aluminum Turnbuckles: Aluminum adjustable turnbuckles used in the T4 are CNC-machined from 7075 T6 material with a stylish black coating. These turnbuckles are used for front and rear upright linkages as well as for the servo saver. The aluminum turnbuckles are lighter than steel to help decrease the overall weight of the car.

 

• Body Posts: Beefy 6mm thick body posts are made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or if you flip the car over. The body supports are rounded to have a better fit and provide better support to the car body. For ultimate tuning and adjustment, XRAY offers optional body height adjustable body posts which allow the independent front and rear body height adjustment by +1mm or +2mm.

• Battery Holders: Smart battery holders are specifically designed for LiPo batteries and are reinforced for higher impacts. The battery holders prevent the batteries from moving under racing conditions and crashes.

• Adjustment Possibilities: The extensive and impressive range of adjustment possibilities includes: caster, camber, toe, anti-dive, anti-squat, ride height, downstops, track-width, lower roll center, upper roll center, roll center positions, steering roll center, wheelbase, Ackermann, optional belt-tension adjustment, adjustable shocks, adjustable rear diff and adjustable optional front XRAY Multi-Diff.

• Chassis Balance: The chassis design focuses on balanced weight distribution and weight transfer. The chassis features pre-drilled holes for additional weights for optimum car balancing. Centerline holes are pre-drilled for easy balancing with the HUDY Chassis Balancing Tool (HUD107880).

• Graphite Grease: The T4 includes premium HUDY Graphite Grease which is a high-performance, advanced-technology semi-fluid lubricant which incorporates both extreme pressure additives and finely-dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increases parts life.

Item no.: 300019

 

Xray Composite Ball Joint 4.9mm – Closed with Hole (4) 302665

Item no.: 302665

XRAY T3 – 2012 Specs- EU Rubber Spec LiPo Edition

(Period: Oct 4 – Oct 11, 2012)

XRAY T3 – 2012 Specs- EU Rubber Spec LiPo Edition

 

The new T3 carries all the heritage and racing pedigree to again raise the bar higher. The T3 platform in its evolution process that has been redesigned and improved for 2012. No extras needed… just a desire to win.

pure DESIGN. pure ADRENALINE. pure RACING.

Please click the link below for more information:
Xray (#300018) T3 – 2012 Specs – EU Rubber Spec LiPo Edition – 1/10 Luxury Electronic Kit

Xray New Parts!!

Team Associated (#90004) SC10 1:10 Electric 4WD Off Road Race Truck Kit

Team Powers New Tire Sets

Xray

PROTOform

Pro-Line

Sweep

KO PROPO

X-ray

3 Racing

SPICE

Team EDS

Futaba