3Racing Automatic Crawler Winch With Control System#CR01-27 & 3Racing Crawler Winch # TXS-01
Here is the ultimate accessory for your Crawler!! 3Racing Crawler Winch System! There are 2 models stocked in rcMart, CR01-27 and TXS-01 . Check below for details!
By the looks, this 2wd Buggy is based on a plastic composite chassis with the usual ingredients such as long wishbones, highly adjustable suspension, rear motor, large volume aluminium shock absorbers, and standard 12mm hex wheels.
The front suspension is a classical design with long straight body front A-arm, Block C, and low basis points. The A-arm mount is made with 3mm high quality Aluminum material. The strength is thus enhanced.
So far, there is no news on the release date, nor the price. Once we receive any new information, we will keep you posted. =)
3Racing has just announced their new Sakura XI Sport, replacing their previously successful entry level touring car, the 3Racing Sakura Zero S. The new Sakura XI Sport combines features from their race level Sakura XI and the soon to be releases all new Sakura Ultimate race platform, while keeping it at a reasonable price.
Features
- Center Front Body Support
- Fully ball raced
- Long Stroke Shocks with Threaded Shock Body
- Improved Material
- Improved Mold Design
- Chassis Mounted Composite Motor Cooling Fan for 40 and 30mm Fans
- Front Belt Stabilizer
- Premium Grade Anodized Low CG 7075 Alum Motor Mount
- Universal Driveshafts all round
- Composite Bulkhead Diff Covers with Torsion Strut
- 3 Racing’s Factory Racing Products Spec Updated Gear Differential
- Race Spec Composite Front Spool with Replaceable Drive Cups from the all new soon to be released Sakura Ultimate
- New Composite Adjustable Battery Mounts with Precision Positioning System from the Sakura Ultimate
- Composite Upper Bumper Mount
- Newly designed Ball Caps
- New Dual Bell Crank Steering System sharing the same geometry as the Sakura Ultimate counterpart
- FRP 2.5mm narrow design Lower chassis, 2.0mm Upper Chassis and 3.5mm Shock Towers
- New Suspension geometry using the same newly developed components from the Sakura Ultimate
- Ultra Fit Composite Servo Horn
- Race Spec Imported Bando Drive Belts
- Two Piece Composite Rear Forward A Arm Pivot Pin Mounts for maximum rear chassis flex.
Optional Ultra Wide Angle Driveshafts for use with SAK-D310/PK Alum Steering System ensures smooth power delivery to the front wheels at steering angles greater than 45 degrees.
The standard Sakura D3's steering system has a maximum steering lock of 45 degrees, by installing the optional SAK-310/PK Alum Steering System, maximum steering lock can be increased to 55 degrees, but to use the increased steering lock beyond the standard 45 degrees, the SAK-D331 Ultra Wide Angle Driveshafts must be used.
There are 2 versions available in rcMart: 3Racing 1:10 RC Formula 1 Racing EP Car Kit #KIT-F113 & #KIT-F113SP
3Racing F113 is the first competitive F1 chassis race kit to bare the 3 Racing “Factory Racing Products” label, the introduction of this label was conceptualized with the idea of including the best materials in our high end race kits and to distinguish our line of successful Sakura car kits from the entry/mid-level to race level. All car kits to bare the “Factory Racing Products” label will feature the finest of materials namely imported high grade 7075 aircraft aluminum, imported woven carbon graphite, PTFE coated shock bodies and ball ends.
3Racing F113 Preorder is now available
Front Suspension
The F113 was redesigned from scratch and shares very little parts with the successful F109, the F113 is the first to feature various innovative concepts previously unseen on mainstream F1 chassis currently available while maintaining the realistic looks of a real F1 car which in many cases is the fundamental success of the class. The F113 will feature a unique front suspension unlike anything available, dual Through Shaft Coil Spring Oil Filled Alum Dampers, Independent Double Wishbone Suspension and features adjustments such as Droop, Camber, Caster, Reactive Caster, Roll Center, Shock Angle, Ackermann with the entire infrastructure supported on 7075 Alum bulkheads.
3Racing F113 Preorder is now available
3Racing F113 Preorder is now available
3Racing F113 Preorder is now available
Rear Suspension
The rear of the F113 employs a 1/12th pan car inspired design with the widely used single pivot ball, side springs and drag link rear suspension system with a longitudinal Symmetric Stroke Through Shaft Design rear Coil Spring Oil Filled Dampers to handle the front and rear weight transfers and another mounted transversely to handle the side to side damping.
3Racing F113 Preorder is now available
Rear Drive Train (Picture shows early prototype motor mount)
The F113 will come standard with a 1/12th scale type 1/4" rear axle and diff equipped with 1/8” stainless steel diff balls plus specially processed diff plates which gives it the extra hardness to handle any high powered brushless motor . Axle Height adjusters will allow adjustments in 0.5mm increments for precise ride height adjustments with any tire diameter.
The motor mount will be constructed from machined 7075 alum for the best rigidity and heat dissipation and will accommodate both Brushed and Brushless Motors.
3Racing F113 Preorder is now available
Upper and Main Chassis
The 2.5mm main chassis and 2mm upper chassis are CNC machined from premier grade imported woven graphite. It will accommodate both standard and low profile servos with plenty of room for electronics. Chassis mounted battery pack stoppers will come standard to precisely position your Lipo battery packs on every installation whether you are using standard or shorty Lipo battery packs.
3Racing F113 Preorder is now available
Steering
Steering on the F113 can be handled through Standard or Low Profile servos depending on the type of batteries and electronics you are using with a servo saver horn for most popular servos (23, 24, 25).
3Racing F113 Preorder is now available
Aerodynamics
To maintain high speed stability and agility, the body, front and rear wings features a completely new design with the aim of providing the right amount of downforce while maintaining realistic looks, the body will as always be unpainted polycarbonate with a realistic hard plastic Driver Helmet and Ultra flexible impact resistant rear wing and front wing mount.
As part of our celebration in the launch of the F113, 3 Racing will feature a first time Cross Over Promotional Combo of a Standard F113 kit bundled with a Speed Passion 17.5R Power Plant and the Innovative Revention S engine management system.
The combo will be offered at a special price, your F113 will now have the power and control needed to race at the highest level.
3Racing F113 Preorder is now available
Item no.:
#KIT-F113 : 3Racing 1:10 RC Formula 1 Racing EP Car Kit
#KIT-F113SP : 3Racing 1:10 F113 F1 Racing Car w/ FREE Speed Passion Competition V3.0 Brushless System (Motor & ESC)
3Racing F113 is the first competitive F1 chassis race kit to bare the 3 Racing “Factory Racing Products” label, the introduction of this label was conceptualized with the idea of including the best materials in our high end race kits and to distinguish our line of successful Sakura car kits from the entry/mid-level to race level. All car kits to bare the “Factory Racing Products” label will feature the finest of materials namely imported high grade 7075 aircraft aluminum, imported woven carbon graphite, PTFE coated shock bodies and ball ends.
Front Suspension
The F113 was redesigned from scratch and shares very little parts with the successful F109, the F113 is the first to feature various innovative concepts previously unseen on mainstream F1 chassis currently available while maintaining the realistic looks of a real F1 car which in many cases is the fundamental success of the class. The F113 will feature a unique front suspension unlike anything available, dual Through Shaft Coil Spring Oil Filled Alum Dampers, Independent Double Wishbone Suspension and features adjustments such as Droop, Camber, Caster, Reactive Caster, Roll Center, Shock Angle, Ackermann with the entire infrastructure supported on 7075 Alum bulkheads.
Rear Suspension
The rear of the F113 employs a 1/12th pan car inspired design with the widely used single pivot ball, side springs and drag link rear suspension system with a longitudinal Symmetric Stroke Through Shaft Design rear Coil Spring Oil Filled Dampers to handle the front and rear weight transfers and another mounted transversely to handle the side to side damping.
Rear Drive Train (Picture shows early prototype motor mount)
The F113 will come standard with a 1/12th scale type 1/4" rear axle and diff equipped with 1/8” stainless steel diff balls plus specially processed diff plates which gives it the extra hardness to handle any high powered brushless motor . Axle Height adjusters will allow adjustments in 0.5mm increments for precise ride height adjustments with any tire diameter.
The motor mount will be constructed from machined 7075 alum for the best rigidity and heat dissipation and will accommodate both Brushed and Brushless Motors.
Upper and Main Chassis
The 2.5mm main chassis and 2mm upper chassis are CNC machined from premier grade imported woven graphite. It will accommodate both standard and low profile servos with plenty of room for electronics. Chassis mounted battery pack stoppers will come standard to precisely position your Lipo battery packs on every installation whether you are using standard or shorty Lipo battery packs.
Steering
Steering on the F113 can be handled through Standard or Low Profile servos depending on the type of batteries and electronics you are using with a servo saver horn for most popular servos (23, 24, 25).
Aerodynamics
To maintain high speed stability and agility, the body, front and rear wings features a completely new design with the aim of providing the right amount of downforce while maintaining realistic looks, the body will as always be unpainted polycarbonate with a realistic hard plastic Driver Helmet and Ultra flexible impact resistant rear wing and front wing mount.
As part of our celebration in the launch of the F113, 3 Racing will feature a first time Cross Over Promotional Combo of a Standard F113 kit bundled with a Speed Passion 17.5R Power Plant and the Innovative Revention S engine management system.
The combo will be offered at a special price, your F113 will now have the power and control needed to race at the highest level.
Photos and descriptions depicts pre-production prototype, final production kit may feature minor updates and improvements.
3Racing is going to release a F1 RC Car- F113. The all new F113 RC Car includes high end materials to improve its durability: 7075-T6 Aluminum, USA imported Graphite, DuPont etc…
Go Shopping!
Get News delivered by email
