July 28th, 2010 Monica Posted in * rcMart.com News, *New Arrival, IMAX | No Comments »
Enjoy 200 Watts Charging Power
Here is the new IMAX B6 Ultimate charger which offer maximum 200W charge power and maximum 10A charge current!!! This charger is suitable for LiPo, LiFe, NI-MH, NI-CD and Lead- Acid Batteries and it comes with the temperature sensor cable which provides safely monitor and terminate charging if temperature exceeds set parameters. Also computer connection kit and USB cable is provided so you can keep track the changing status as well as the health of your battery pack through the computer. Order one and enjoy the most advanced charging technology now.
The IMAX XH charger adaptor board has also arrived so don’t forget to check out the link if you need extra balancing board for your charger.
Click here to buy IMAX B6 Ultimate Charger!
Click here to buy IMAX XH Charger Adaptor Board!
IMAX B6 Ultimate charger
Feature:
High performance microprocessor
Internal independent lithium balancer
Adaptable to various types of lithium battery
The automatic charge termination program is based on the principle of the Delta-peak voltage detection. The upper limit of the charging current can be set up when charging NiCd or NiMH battery; If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value
Processing time limit
The maximum five batteries’ data can be stored for users’ convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting
B6 Ultimate features the so-called AUTO function that set the feeding current during the process. It can prevent the overcharging. It can disconnect the circuit automatically and alarm once detecting any malfunction. The programs are controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble
During the process of discharging, B6 Ultimate can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal
Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery
Input power monitoring
Cyclic charging / discharging
For: LiPo, NI-MH, NI-CD and Lead- Acid Batteries
Specification:
Operating voltage range: DC11.0-18.0 Volt
Circuit power: Max. charge power 200w; Max. discharge power 25w
Charge current range: 0.1-10.0A
Discharge current range: 0.1-5.0A
Current drain for balancing Li-po: 200mAh/cell
Li-ion/Fe/Polymer cell count: 1-6 cell
NiCd/NiMH battery cell count: 1-18 cells
Pb battery voltage: 2v-24v
Dimensions: 150×116.5x53mm
Click here to buy IMAX B6 Ultimate Charger!
Click here to buy IMAX XH Charger Adaptor Board!
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
Go Shopping!
Get News delivered by email
Leave a Reply