1 / 10 Electric RC Car Series No.429
CR-01 Jeep Wrangler YJ
Available : Jan 20, 2009
By fitting the model is a new era of Wrangler was born in 1987 Jeep (YJ-) is the electric RC car. The appeal body mold injection molding detail and sharpness and bonnet catch . 4WD shaft-drive chassis of the CR-01. High-rigidity members, side members and cross-plastic and aluminum, with oil dampers using aluminum rods Heavy duty components and features a four link suspension. In addition, de flock increase traction, with large diameter tires , and equipment. Wrangler body and the best way would be a remarkable way with the very best combination. Moreover, the home of ROKKUKURORINGU in the U.S. as popular as Wrangler-based model, RC fight and look good in the race car is in rough ground.
[ Jeep Wrangler (YJ)] and is also synonymous with a small four-wheel drive vehicles “Jeep” has a long history, the 1941 four-wheel-drive military-produced small, Willis MB and Ford GPW its roots . In 1945 the civilian Jeep CJ-have been released, and that further spread its name. Leave a strong image for the CJ type of military vehicles, a jeep of a new era was born in 1987 in a jeep RANGURA year (YJ-). Bonnet was much lower in the series of 4.2-liter six-cylinder gasoline engine with a part-time 4WD with a mechanism. The larger the body, improve stability and increase the pace car. While maintaining the high road JIPURASHIKU, ride quality is improved by using a soft suspension is a major characteristic of the rectangular headlights. YJ-63 is the year 1995 is 10,000 units sold, as a base for ROKKUKURORINGU machine and cross-country today, is highly popular among fans.
4 equipped with stabilizers RINKURIJIDDOSASUPENSHON around, with tremendous tenacity SASUSUTOROKU have to show traction.
~Tire & Wheel
Side to Wall block pattern, built-in tire on the wheel, a ring is attached bead set of locks.
OIRUDANPA push rod and rocker arm to get it to work with, in isolation dampers and coil springs are mounted at the roll off of the spring growth as a side effect.
Servo steering axle on a fixed-bed servo. Obstructing the movement of Sassou-mounted system.
The allocation of power transfer before and after the pre-assembled. The ratio could be a big slowdown in compact built-PURANETARIGIYA.
Def around for three BEBERUTAIPU, setting a basic state of rock. ROKKUKURORINGU needed to produce high-traction.
~Characteristics adopting light-gon front of the mask. LED light unit is equipped with a standard, you can enjoy the lights lit at all times.
~Catch the hood and DOAHINJI delicate and reproduced in the mold. In addition, a sense of scale to mount a high surface finish is not attractive.
~LED taillights and units (red) and equipped with lights at all times. In addition, off-road driving is essential in parts of the HAIRIFUTOJAKKI.
[ Basic Specifications ]
- Overall length: 435mm
- Width 265mm
- Height 270mm
- body weight 2633g
- Wheelbase = 288mm
- both before and after the tread = 208mm
- Tire Width / diameter = 57/125mm
- frame = both before and after the plastic and aluminum side members Rigid cross members RADAFUREMU
- Drive system that combines a drive motor shaft Vertical = 4WD
- system DEFUGIYA = around: 3 Bevel (basic setting DEFUROKKU)
- PURANETARITAIPU Transfer = Suspension with about 4 RINKURIJIDDO
- Damper = CVA oil dampers and around the gear ratio = 1:40.5
- speed controller = ESC specification (optional)
- Motor = RS540 type
Source : Tamiya
Where to buy ?
Tamiya Car Kits