How to use a body opener?
If you buy a finished body set but there is no drilled hole on the body, you need some tools to help!
1.Body hole opener
Put the body hole opener on the body post.
Then put the body down. But don’t push it down hard!
*Pushing it down too hard will break the body !
Now there is a mark on the body. A Caliper is needed to measure the alignment between the mark and the body so that you make sure if the mark is equidistant to the left and the right of the body or not.
If the left and the right are balanced, use the Reamer to drill the body post .
Where to buy ?