-
-
AONENG (#AN-100) Electric Tester
[An-100]
Our Price: Low Price: USD$4.90
Stock: 20+
Buy this item and earn 5 points valued at USD$0.02.
Directions:
The tester is suitable to measure 12-220V A.C. and D.C. directly as well as measure the ground line, phase line and the breakpoint of the A.C. indirectly.
1. Voltage measurement:
The final digits are the measured voltage.
if the display value cannot reach 70% of the high section, it will display the lower section.
Touch the negative pole with hand when megsure D.C. circuit.
Use induction pole when measured bodies under 12 volts, charged or not.
When induction body is under measured, it must connect to ground or zero.
2. Induction measurement:
When measurement is performed on one of the panallet lines, it is necessary to widen them, or press the measured line with your hand so as to eliminate interference.
3. Breakpoint detection.
|
rcMart.com © 2001 - 2013
Facebook
Twitter
Google+
Youtube
Blog