I bought this at $6.90 and at this price, this is really good value. I have the more expensive Team EDS one also but the o-ring that secures the cap has disintegrated on that. With this one, the cap screws on so you won't have o-ring issues. For those of you who like specs, this weighs 54g vs the Team EDS' 76g. And it cuts holes up to 14mm vs 17mm on the Team EDS. This is more than sufficient for most 1/12 to 1/8 lexan bodies. The cutting surface is comparable to the Team EDS and the exterior finish is of average to good quality. Definitely recommend this for those on a budget yet want a quality tool. If I had to nit-pick a fault, I would say that they should have covered the hole at the bottom of the tool with an end-cap finisher so you don't see the hollowness and perceive it to be poorer quality. Not sure why they left this end open when they did a neat job with that nice shiny end cap for the cover.