3Racing Sakura XI Sport 1/10 Toyota 86 w/ ESC 13T Motor High Speed Servo 2.4Ghz Radio Beginner Combo Set #CB0890
- 3Racing 1/10 Sakura XI Sport Toyota 86 Touring Car Kit #KIT-86XS
- Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
- Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
- Power HD 4.8-6.6V HIGH TORQUE Digital Servo 0.12sec/180.5oz-in/13kg-cm For Crawler / Buggy / On-road #LF-13MG
- Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter w/ Receiver #ONI3701
3Racing 1/10 Sakura XI Sport Toyota 86 Touring Car Kit #KIT-86XS
- 3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S
- 3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC #LBD-86
3Racing Sakura XI Sport 1/10 RC Touring Car #KIT-SAKXI-S
3Racing has introduced its successor to the popular Sakura Zero Touring car the Sakura XI featuring some innovative designs which distinguishes itself from anything else currently available. The original Sakura Zero was developed during the transitional time between brushed and brushless motor, Ni-MH and Lipo batteries, technology has come a long way since then and with all the knowledge and experiences accumulated from the development of the Sakura Zero, 3Racing has designed a completely new touring car specifically for Brushless Motors and Lipo Batteries resulting in a much more consistent car from track to track and varying conditions, easier and less maintenance with some added adjustability. The New Sakura XI is one of the most innovative touring car designs currently available with many unique designs that are both easily identifiable and subtle to the naked eye.
Center Front Body Support.
Long Stroke Shocks with Threaded Shock Body.
Chassis Mounted Composite Motor Cooling Fan for 40 and 30mm Fans.
Front Belt Stabilizer.
Improved Material. Universal Driveshafts all round.
3 Racing's Factory Racing Products Spec Updated Gear Differential.
Race Spec Composite Front Spool with Replaceable Drive Cups from the all new soon to be released Sakura Ultimate.
New Composite Adjustable Battery Mounts with Precision Positioning System from the Sakura Ultimate.
New Dual Bell Crank Steering System sharing the same geometry as the Sakura Ultimate counterpart.
Race Spec Drive Belts.
* Photos for reference only.
- Center Front Body Support
- Fully ball raced
- Long Stroke Shocks with Threaded Shock Body
- Improved Material
- Improved Mold Design
- Chassis Mounted Composite Motor Cooling Fan for 40 and 30mm Fans
- Front Belt Stabilizer
- Premium Grade Anodized Low CG 7075 Alum Motor Mount
- Universal Driveshafts all round
- Composite Bulkhead Diff Covers with Torsion Strut
- 3 Racing's Factory Racing Products Spec Updated Gear Differential
- Race Spec Composite Front Spool with Replaceable Drive Cups from the all new soon to be released Sakura Ultimate
- New Composite Adjustable Battery Mounts with Precision Positioning Systemfrom the Sakura Ultimate
- Composite Upper Bumper Mount
- Newly designed Ball Caps
- New Dual Bell Crank Steering System sharing the same geometry as the Sakura Ultimate counterpart
- FRP 2.5mm narrow design Lower chassis, 2.0mm Upper Chassis and 3.5mm Shock Towers
- New Suspension geometry using the same newly developed components from the Sakura Ultimate
- Ultra Fit Composite Servo Horn
- Race Spec Drive Belts
- Two Piece Composite Rear Forward A Arm Pivot Pin Mounts for maximum rear chassis flex
- Length: 434mm (without Body & Foam Bumper)
- Weight: approx. 1380g
- Wheelbase: 257mm
- Tread Front and Rear: 163mm (Front) / 161mm (Rear)
- Gear Ratio: 2:1 (38T/19T)
- 3Racing Sakura XI Sport 1/10 RC Touring Car (1 Set)
- Tire (4 pcs)
- Wheel (4 pcs)
- 2 Channel Radio System
- Steering Servo
- Electronic Speed Controller
- 540 Type Motor and 48 Pitch Pinion Gear
- Polycarbonate Body Shell and Paint
- Battery and Charger
- Assembly Tools
3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC #LBD-86
This is 3Racing Toyota 86 Clear Body Parts Set 1 pc For 1/10 RC.
*Photos for reference only.
- For: 1/10 RC
- Material: Lexan
- Clear protective film to prevent overspray: Yes
- Pre-drilled mounting holes: No
- Width: 190 mm
- Wheelbase: 257 mm
- Toyota 86 Clear Body (1 pc)
- Front Light Case (1 pair)
- Rear Light Case (1 pair)
- Rear Wing (1 pc)
- GT Rear Wing (For Race) (1 pc)
- Sticker (1 pc)
- Masking Sticker (1 pc)
- Body Clip (6 pcs)
- M3x6mm Flat Head Screw (2 pcs)
- M2.6x6mm Button Head Screw (6 pcs)
- 3mm Lock Nut (2 pcs)
- 3mm O-Ring (2 pcs)
- Double-Sided Tape (1 pc)
- Manual (1 pc)
Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
After the revolutionary Hacktronic ESC introduction, Yeah Racing is now introducing the almighty Tritronic 1/10 Waterproof Brushed 60A Electronic Speed Controller ESC. It is water-proof & dust-proof, making it almighty to race under all weather condition. It has 3 running modles compatible to various vehicles and multiple protections in case of low voltage, over-heating or Throttle signal loss.
- For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
- Water-proof and dust-proof, suitable for all-weather condition races.
- Small size with built-in capacitor module.
- Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
- Great current endurance capability.
- Great built-in BEC output capacity.
- Automatic throttle range calibration, easy to use.
- Easy to set the ESC parameters with jumpers.
- Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.
- Model: ESC-1060WP
- Fwd. Cont. / Peak Current: 60A /360A
- Rev. Cont. / Peak Current: 30A /180A
- Voltage Range: 2-3S Lipo or 5-9 NiMH
- Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
- 2S Lipo or 6 NiMH
- 540 or 550 Size Motor: ≥12T Or RPM<30000 @7.2V
- 3S Lipo or 9 NiMH
- 540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V
- 4S Lipo or 12 NiMH
- Resistance: Fwd 0.001Ω, Rev 0.002Ω
- BEC Output: 2A/5V (Linear Mode)
- PWM Frequency: 1KHz
- Dimension / Weight: 36.5*32*18 / 39g
- Cooling Fan: Without cooling fan
- Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse
- Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC (1 Set)
- Manual (1 pc)
Yeah Racing Hackmoto V2 13T 540 Brushed Motor #MT-0012
This Yeah Racing Hackmoto V2 Modified brushed motor series are high performance 540 motors designed exqusitivly for competitive RC usage.
Hackmoto V2 featured premium quality material with high strength magnets for unmatched brushed motor speed and torque. Beside of its performance, the motor featured direct-solder wiring tabs for flexible soldering options. It is also designed to be rebuildable with an easily accessible commutator and replaceable brushes and springs. The motor also adapted dual-ball bearings design yields better performance, allowing a smooth ride, precise control with best possible efficiency.
- Size: 540
- For: 1/10 RC Car
- Color: Black
- Rebuildable with an easily accessible commutator and replaceable brushes and springs
- High strength magnets for unmatched brush-motor performance
- Specifically designed for R/C vehicles that require precise movement control
- Excellent torque and long-run times
- Direct-Solder Wiring Tabs for flexible soldering options
- Dual-ball Bearings Design
- Length: 70mm
- Width: 36mm
- Shaft: 3mm
- Turn: 13
- Input Voltage: 7.4v
- Max. Input Voltage: 11.1V
- Shaft Length: 13mm
- Yeah Racing Hackmoto V2 13T 540 Brushed Motor (1 pc)
Power HD 4.8-6.6V HIGH TORQUE Digital Servo 0.12sec/180.5oz-in/13kg-cm For Crawler / Buggy / On-road #LF-13MG
This is Power HD 4.8-6.6V HIGH TORQUE Digital Servo 0.12sec/180.5oz-in/13kg-cm For Crawler / Buggy / On-road #LF-13MG. Power HD LF-13MG is an excellent budget Digital Metal Gear servo for 1/10 & 1/8 cars,30CC or 50CC planes. Features middle aluminum casing for extra cooling and copper metal gears sure can't beat the price and performance of this servo.
- For: Crawler / Buggy / On-road
- Material: Middle Aluminum Casing With Plastic Top and Bottom
- Color: Red and Black
- Copper & Aluminum Gear
- Model: LF-13MG
- Torque(4.8V): 10.5 kg-cm (145.8 oz/in)
- Torque(6.6V): 13.0 kg-cm (180.5 oz/in)
- Speed: 0.15 sec (4.8V) │ 0.12 sec (6.6V)
- Operating Voltage：4.8 ~ 6.6 DC Volts
- Weight: 60 g (2.12 oz)
- Bearing Type：Ball Bearing x 2
- Motor Type：DC Motor
- Gear Type：Copper & Aluminum
- Operating Temperature：-20℃~60℃
- Working frequence：1520μs / 333hz
- Size：40.7 x 20.5 x 39.5 mm ( 1.60 x 0.80 x 1.55 in)
- Power HD 4.8-6.6V HIGH TORQUE Digital Servo 0.12sec/180.5oz-in/13kg-cm For Crawler / Buggy / On-road #LF-13MG (1 pc)
Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter w/ Receiver #ONI3701
*Photos for reference only.
Onisiki's 2 channel 2.4Ghz Radio Kit with a receiver that features failsafe function which aims to prevent any accidents if your battery runs out on either on receiver or transmitter. If the Receiver is not able to receive any signal, from the control to Throttle, the parameter of Throttle on Receiver will turn back to its original setting! Features dual rate control and servo reverse for any custom rc enthusiast!
- For: RC Cars and Boats
- Transmitting Frequency: 2.4GHz
- Transmitter Channels: 2 Channels
- Receiver Channels: 3 Channels
- Operation method: Wheel + trigger type
- Frequency: 2.40-2.48GHz
- Code type: GFSK
- Bandwidth: 500Hz
- Band: 160
- RF Power: Less than 20DB
- 2.4G System: AFHDS
- Sensitivity: 1024
- ST Range: 90
- TH Range: 45 (F:30; B:15)
- Transmitter Colour: Black and Red
- Transmitter Material: Plastic
- Receiver Material: Plastic
- Power: 3.7V DC
- Size: 224 x 156 x 94.5mm
- RF. receiver sensitivity: -100dbm
- Input Voltage: 4.5-6vdc
- ANT length: 33mm
- Size: 37.6 x 22.3 x 13mm
- Onisiki 2.4GHz 2 Channel 2.4Ghz Transmitter (1 pc)
- Onisiki 3 Channel 2.4GHz Receiver (1 pc)
- TX Antenna (1 pc)
- Bind Plug (1 pc)
- Manual CD (1 pc)
- AA Battery for Transmitter (4 pcs)