3Racing Sakura D4 RWD 1/10 Drift Car Kit w/ Yeah Racing Hackgear Servo YR Gyro Balance Weight 23g #CB0846 FREE SHIP
- 3Racing Sakura D4 RWD 1/10 Drift Car Kit #KIT-D4RWD
- Yeah Racing Hackgear Drift Spec Low Profile Digital High Speed Coreless Servo 0.08 Sec Pink #YE-0022PK
- Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver #YA-0429SV
- Yeah Racing High Precision Gyro GC301 For RC Drift F1 Car #GC301
3Racing Sakura D4 RWD 1/10 Drift Car Kit #KIT-D4RWD
The all new Sakura D4 Drift Chassis is 3Racingĺs newest iteration of their drift platform. Do not be fooled by the price, it features parts which are option parts on cars twice the D4's price.
Featuring two battery locations, one infront of the motor and one on the rear diffuser to allow users to tune the weight distribution based on user's liking. Combining ideas and feedback from D3 users, the D4 was redesigned from the ground up and features new parts.
*Photo for reference only.
- Weight Distribution: Allows the battery to be mounted on the rear diffuser or infront of the motor.
- Steering: A redesigned steering rack which allows the massive steering angles required for RWD drifting.
- Drivetrain: Utilizing a belt drive system, connecting to a rear spool follows the trends of new drift cars.
- Suspension: Suspension components have been completely redesigned to accommodate the large steering angle of this rwd drift car. Features Y arm suspension on the front which is seen almost all high end cars, will prevent the wheels from hitting the a-arm.
- Oil Filled Coil Spring Shocks: Lengthen 55mm coiled spring oil filled shocks with threaded shock bodies allows a more progressive chassis roll action and easy tuning
- Molded Rear Diffuser: For an added touch of realism, a molded composite rear diffuser comes standard to give the Sakura D4 the extra attention to detail
- FRP Chasis : The Sakura D4 will be outfitted with a FRP lower plate chassis designed with rigidity in mind to ensure efficient side to side weight transfer to easily initiate high speed drifting.
- 3Racing Sakura D4 1/10 Drift Car Kit(RWD) (1pc)
- Radio System (Min. 2ch)
- Pinion (48p, 22T recommended in manual)
- Battery (7.2V, this kit will fit both shorty packs and normal size)
Yeah Racing Hackgear Drift Spec Low Profile Digital High Speed Coreless Servo 0.08 Sec Pink #YE-0022PK
Specific firmware tuned software for Drift cars from Yeah Racing! Quick and precise steering response to give you full control over your drift car.
- For: 1/10 Drift, On Road RC
- Material: Plastic
- Premium Value at lower price point
- Long wears titanium gear and copper gears
- Digital precision provides great accuracy and performance
- Ball bearing-supported output 25T shaft
- Compatible with all types of Radio system
- Type: Digital
- Operating Voltage Range: 4.8 -6.0Volts DC
- Bearing Type:Dual Ball Bearings
- Speed (s/60░@4.8V/6.0V): 0.10/ 0.08
- Torque oz./in. (4.8V/6.0V): 76/97
- Torque kg./cm. (4.8V/6.0V): 5.5/7
- Size: 40.9mm x 20mm x 25.2mm
- Motor Type: Coreless
- Operating Temperature Range(℃): -10░ to 50░
- Dead Band Width: 2Ás
- Potentiometer Type: Rotating(Max.220░)
- Connector Wire Length: 11.8 in. / 300 mm.
- Connector Wire Gauge: 25 AWG Black Wire
- Connector Type: Futaba
- Gear Type: Titanium Gears + Copper Gears
- Frequency: 330Hz
- Shaft: 6mm 25T
- Hackgear Drift Spec Low Profil Servo (1 pc)
- Servo Horns (2 pcs)
- Mounting Hardware (1 pack)
Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver #YA-0429SV
This is Yeah Racing Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver. This bottle can help fine tuning your chassis's balance while giving it a better look. Yeah Racing exquisitely use the premium quality of material coupled with precise CNC cutting to manufacture this Balance Weight Bottle.
- For: Balance Weight Bottle
- Material: Aluminum
- Color: Silver
- Yeah Racing Aluminum Nos Nitrous Oxide Balance Weight Bottle 23g For 1/10 RC Silver (1 pc)
- Accessories (1 Set)
Yeah Racing High Precision Gyro GC301 For RC Drift F1 Car #GC301
High Precision GC301-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience.
The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you chose. It will also precisely maintain car direction regardless of the amount of traction of the track or outside force apply to the car. With heading hold, the car is more maneuverable and controllable.
*Photos for reference.
- For: 1/10 RC Drift/ F1 Car
- Make corrective steering adjustment for RC cars
GC301 gyro allows you to drive the RC car toward a given direction and taking precision turns at high speeds more manageable, more controllable and more stability.
- Remote gain function
You can adjust gain from the transmitter CH3 by using the remote gain function. Gain can also be adjusted with the trimmer on the GC301.
- Length: 21mm
- Width: 21mm
- Height: 11mm
- Gyro Sensor: Vibration Structure Gyro
- Operating Voltage: 4-8.4V
- Current Drain: 25mA
- Operating Temperature Range: -10║C to +45║C
- Weight: 3.6g
- Yeah Racing High Precision Gyro GC301 (1 pc)
- Extension Cord (2 pcs)
- Tape (1 pc)
- Manual (1 pc)