3Racing Sakura FF 1:10 Electric Car EP
Description:
3 Racing are proud to announce the release of the Sakura FF, a front wheel drive electric powered touring car.

The Sakura FF has a front mounted motor, placing the maximum amount of static weight over the drive wheels, improving steering and grip, maximizing performance. The machined aluminum bulkheads front and rear provide a solid base for the chassis, and provide additional cooling to the motor, with enough clearance for all of today’s brushless motors.
The chassis, top deck and shock towers are machined from fully imported US grade carbon fiber, to provide good looks, strength and light weight. Twin bell crank steering provides smooth slop free steering, while allowing Ackerman to be easily adjust by way of shims.
Fluid filled gear diff is supplied as standard, allowing you to adjust the handling characteristics by changing the viscosity of the oil, which minimizes unwanted wheelspin during acceleration.

The Sakura FF is designed with Lipo batteries at heart, the battery is located down the centre line of the chassis to maintain optimum balance and is captured at both ends to eliminate the need for battery tape or nasty battery straps that can affect the performance of your racing machine. With the electronics mounted to a removable tray to allow you to easily change out the battery

There are many shared parts with the Sakura Zero, including the shocks, rear bulkheads, suspension arms, C Hubs, knuckles and uprights. All which are already widely available in the marketplace, helping you the racer limit the amount of spares required.Share in the excitement of this new class of touring car racing, enjoy the challenge of driving a FWD, and feel the control of the Sakura FF at your fingertips
Feature:
- 2.25mm Graphite Main Chassis & 2.0mm Graphite Upper Desk
- Front Motor Front Wheel Drive
- Gear Differential
- 3 Crank Arms Steering System
- Front Universal Shaft
- 4 Wheel Double Wishbone Suspension
- All Titanium Turnbuckle
- Aluminum Oil Damper Set
- F&R Aluminum Bulkhead
- 3.0m F&R Graphite Shock Tower
- Quick Change Battery Tray
- 4 x Aluminum Suspension Mount
- F&R Stabilizer
- Full Ball Bearing
Specification:
- Length: 385mm
- Front Width: 185mm
- Tread (F/R): 157mm
- Wheel Base: 257mm
- Gear Ratio: 2.71:1 (Internal) 6.77:1 (Final: 40T/16T)
Include:
- Sakura FF Chassis kit (1set)
- Wheels (4pcs)(Without tires)
- Instruction manual
Require:
- 540 Type Motor
- Body
- 2-channel R/C unit with ESC
- Battery
- Charger
|