This is the perfect kit for upgrading tt01. Rigidity will increase and weight will decrease effectively. Also this kit makes your tt01 more beautiful :)
Kit designed with clever small details but there is one negative detail which is about the motor mount. Pinion and spur gear can not easily touch with each other even screw is in the end of the setup rail. There is no information how to do it in the manual sheet. Screw type changing can be the solution for that.
This is by far the best investment I have made for my son's TT01E. The carbon parts were 100% accurate and all parts fit perfectly. Please take note that shock tower, gear box cover (Front/Rear half) are not provided and must be transferred from stock kit. The battery strap is designed to take LiPo sticks, NiMh sticks may have wires get in the way of the strap. Overall excellent product from 3 Racing, 5 stars.
3 Racing has another great product here. Just brought one of these. Looks really good. Accepts heaps of alloy parts. On thing i would recommend to 3 racing is to make the instruction a bit bigger to an A4 sheet. apart from that, a great product. Thanks heaps RC Mart for the great product you sell.
kompisen min har denne, og han er fornøyd med den. får håpe jeg også blir det. jeg har tt01 orginalen som er i plast, jengene blir herpa med en gang nesten, hvis du skrur lit for hardt. sammen med dette så har jeg også bestilt nye drev, kulelager og universal shaft (vet ikke hva det er på norsk), så det blir bra til den nye 9t motoren.
This is a great kit. Comes with everything you would need for a standard build out. The carbon as was said is well cut. The kit goes together flawlessly. THe only things that I would change out are as follows. 1) Remove the standard gearbox halves (if you have the standard TT-01) and replace them with the E versions. This will give you much more adaptability for shock angle movement and gives you the option to use the carbon E Type replacements. Next, if you have a dremel, mill the motor placement holes a little wider so that you can move the motor further inward toward the spur. This way you can use all of the spurs available. Lastly, as always, superglue the edges of the carbon. As with all carbon planes it will fragment if you hit it hard without CAing the edges. Other than these thing..
Carbon is well cut, but not all plastics are included with the kit. Is too expensive - for the price it should had have all plastic needed. Upper carbon deck is thin and doesn't have holes for rear stabilizer set #53695 from Tamiya - if you wish to use, you have to drill two holes yourself. The way it is designed, is clear they didn't think about using stabilizer roll bars with this chasis. Aluminium parts are well made. However, motor stand or rear gearbox do not have well calculated positions on chasis since spur wables a little. You might also have a surprise by not being able to use previous lexan body, because the distance between front and rear wheel axles increases a few milimeters, hence previous 190 mm body could touch the wheels.