Any chance to provide a set of only upper and lower, front and rear, arms and dogbones?
I already have shortened my chassis, and have other projects of various lengths, therefore most of this kit would be a complete waste to me.
Mostly, cos I need few TT-01 chassis in original length, but with narrow track.
If possible, I would order at least 2 sets of those, and most probably 5 sets.
It would also be interesting to create - as a ready set - arms form this kit, combined with steel joint axles for M-chassis and applicable diff joints for TT-01.
Thanks in advance
Bought this with the intention to build a rc drift nissan cube!
It needed 210mm wheelbase.
As is, this kit cant get there without some careful hacking of the upper and lower suspension arms.
I did it with a stanley knife. I used the bits I cut off as spacers on the other side of the rod.
This needs to be done on front and rear, upper and lower arms.
I managed to get within .5mm too long of 210. I was happy enough with that, didnt think I needed to go that extra half mm!
Would have given it a perfect rating if it had not been for that.
Great kit, let down only by a few cheap parts. The photos shown are the kit with all the upgrade options(blue bits).
Do yourself a favour & replace the dogbones,centershaft,steering,turnbuckles with the upgrade options.
Im running a 9T brushless, corners/drives sooo much better than M03.
Now my favorite car!!
This kit is great , I used it to convert my TT01-R ,
with the 3racing hop-up parts its now the ultimate M.
Warning for those with a TT01-R ;
You need folowing parts : 3Racing TT01-29/LB Bevel gear shaft and the
M03M-11/V2 Swing Shaft Ver 2 ( 2 sets needed )
because the TT01-R parts are not compatible with the shaft and the dogbones.
After racing TT-01 in the TAC for 2 seasons, I got tired of it and unable to sell of a totally hop-up TT-01. I also wanted to take part in the Mini Class which is now the in thing in town. Instead of getting another car kit, I opted for this as I love to drive a 4WD Mini. Together with a totally hopped up TT-01 is an advantage as I already have ball diff and one-way diff plus tonnes of spare parts too !!
The conversion Mini performs very well and a lot of bite !! Now I don't have to spend tonnes of money to hop-up a totaly new car to be competitive. This conversion kit really fits to those who already have a TT-01 and wanted to run Mini Class but not wanting to get another car.
I can always refit all the TT-01 original parts again when I want to take part in the Touring Stock Class. A great value for money.
Great little bit if Kit. Instructions a little bit tricky to understand at time's due to the pictures. Does not come with Hex key to fit the screws that come in this kit. Would have been better if they had supply one. Was a little disapointed that I could'nt fit my Tamiya M03 bodyshell streight onto the chassis due to the position of the rear bodypost not being curved enough. But the wheelbase is fine. Will buy an ABC bodyshell for it rather than drilling new holes on my Mini shell.
All round realy lovely chassis conversion & fantastic value for money here at RC Mart.