Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. 3Racing CACTUS 1/10 2WD RC Racing EP Buggy w/ Brushless System 2.4Ghz Radio Set Servo COMBO #CB0651
    [CB0651]

    Our Price:  Low Price: USD$376.40

    Stock: Out of Stock!

    Buy this item and earn 376 points valued at USD$1.51.

    Write a Review
    Quantity:
     

3Racing CACTUS 1/10 2WD RC Racing EP Buggy w/ Brushless System 2.4Ghz Radio Set Servo COMBO #CB0651


Include:

  • 3Racing CACTUS 1/10 2WD RC Racing EP Buggy #KIT-CACTUS (1 Set)
  • FLYSKY Digital 3CH 2.4GHZ TX & RX LCD Transmitter & Receiver for RC Car Boat #FS-GT3B 2.4G (1 Set)
  • Power HD High Speed Metal Gear Analog Servo For 1:10 Buggy RC Car #HD-9001MG --2 pcs--
  • Speed Passion Reventon Stock Club Race Brushless ESC Metal Black for 1/10 RC Car #SP000048 (1 Set)
  • Yeah Racing Modified 540 Sensored Brushless Motor 10.5T 3600kv For 1:10 Onroad & Offroad RC Car #MT-0008 (1 Set)

3Racing CACTUS 1/10 2WD RC Racing EP Buggy #KIT-CACTUS


Description:

3Racing introduces their entry into the hotly contested 2WD electric off road buggy class, the "Cactus".

Built from the accumulation of over 18 months of research and development, prototyping, testing and driver feedbacks, the result is a buggy that’s competitive straight out of the box at a reasonable price due to our improvements in the manufacturing processes.

The Cactus is fully adjustable to adapt to any track conditions, the kit includes all the parts need for Mid Motor 4 Gear Gearbox setup or the traditional Rear Motor 3 Gear Gearbox setup.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


The Cactus in Rear Motor drive configuration


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Machined Anodized Alum Pivot Pin Brace/Stiffener
- No E clip design throughout.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Rear Anti Roll Bar Mount (Anti Roll Bars not included)
- Replaceable Rear Pivot Pin brace allows rear toe and anti squat adjustments.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Wide Rear Wheel Hubs
- Minimizes axle vibrations and toe angle variations .
- Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Industry standard Double Slipper Clutch
- Slipper Pad Housing made from machined hard coated 7075 Alum.
- Machined Anodized 7075 Alum Motor Mount.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Impact resistant composite Motor Guard


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


12.5mm Big Bore Shocks
- Composite Shock Caps with Oil Bleed Holes.
- PTFE Coated Threaded Alum Shock Bodies.
- Titanium Nitride Coated Shock Shafts.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Front and Rear 12mm Wheel Hex adaptors included


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Front Suspension
- Trailing Axle Spindles.
- Oversized 5x10x4 Front Spindle Bearings.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Carb Forward High Downforce body


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Molded Slipper Clutch dust guard with easy access hatch rubber sealed hatch


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Stiff Composite Front and Rear Arms with Reinforcing ribs


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Long Wheelbase Super Narrow Chassis molded composite chassis


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Steering
- Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
- Servo horn integrated adjustable servo saver.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Integrated Chassis Wiring Tunnels


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Main Chassis
- Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor only).
- Centralized ESC Mounting Graphite Plate.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Oversized Ball Caps throughout


*Photos and descriptions depicts pre-production prototype, final production kit may feature minor updates and improvements.


Feature:

  • 2.6 Internal Reduction Gearbox.
  • Rear Alum Forward Pivot Pin Mount.
  • Rear Sway Bar Mounts.
  • Titanium Nitride Coated Shock Shafts.
  • CNC Machined POM Shock Pistons and Shaft Liners.
  • Oversized Rear Hub Bearings.
  • Metric Hardware all round.
  • Wide Rear Hub minimizes axle vibrations and toe angle variations.
  • Industry standard Double Padded Slipper Clutch.
  • CNC Heatsink Motor Plate.
  • Body and Tire Sets included.
  • Fully Ball Raced.
  • Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.
  • Impact resistant composite Motor Guard.
  • No E Clips pivot pins design.
  • Alum Front Arm Pivot Pin Stiffener.
  • Composite Shock Caps with Oil Bleed Holes.
  • PTFE Coated Threaded Alum Shock Bodies.
  • Front and Rear 12mm Hex wheel adaptors.
  • 12.5mm Big Bore Shocks.
  • Carb Forward High Downforce body.
  • 3 Gear Rear and Mid Motor 4 Gear Gearboxes included.
  • Stiff Composite Front and Rear Arms with Reinforced ribs.
  • Super Narrow Chassis.
  • Oversized 5x10x4 Front Spindle Bearings.
  • Trailing Axle Spindles.
  • Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
  • Designed for Centralized Electronic Components Mounting.
  • Dual ESC Mounting Positions.
  • Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor Drive).
  • Integrated Chassis Wiring Tunnels.
  • Composite Flex Optimized Chassis to provide the highest traction on low to medium bite tracks.
  • Accommodates both standard and shorty Lipo batteries.
  • Long wheelbase optimized for brushless motors and Lipo power.
  • Oversized Ball Caps.
  • Adjustable Heavy Duty Ball Differential.
  • 80T 48 Pitch Spur Gear.

Vehicle Specification:

  • Length: 410mm MAX
  • Width: 250mm
  • Weight: Approx 1600g
  • Wheelbase: 250mm

Include:

  • 3Racing 1/10 CACTUS 2WD Buggy Racing Car EP (1 Set)
  • Decals
  • Instruction

Require:

  • Motor
  • ESC
  • Radio Set
  • Servo
  • Battery
  • Charger

FLYSKY Digital 3CH 2.4GHZ TX & RX LCD Transmitter & Receiver for RC Car Boat #FS-GT3B 2.4G


Description:

This is a FS-GT3B Remote Control System comes with FS-GR3E Receiver. The FS-GT3B used theAFHDS (Automatic Frequency hopping Digital System), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the markets. It is the upgrade version of the FS-GT3. It has a large monitor with much greater functions.


Feature:

  • For: All RC Car / Boat
  • Channels: 3
  • RF range: 2.4-2.48GHz
  • Bandwidth: 500KHz
  • Band: 160
  • RF power: less than 20 dBm
  • 2.4G system: AFHDS
  • Code type: GFSK
  • Sensitivity: 1024
  • Low voltage warning: yes(less than 9V)
  • DSC port: yes(3.5mm; output: PPM)
  • ST range: 90
  • TH range: 45(F: 30;B:15)
  • Charger port: yes
  • Power: 12V DC(1.5AA*8)
  • Color: Black

Specification:

  • ANT length: 86mm
  • Size: 151x183x116mm

Receiver:

  • For: All RC Car / Boat
  • Channels: 3
  • RF range: 2.4-2.48GHz
  • Bandwidth: 500KHz
  • Band: 160
  • RF power: less than 20 dBm
  • 2.4G system: AFHDS
  • Code type: GFSK
  • Sensitivity: 1024
  • Low voltage warning: yes(less than 3.5V)
  • DSC port: yes(USB; output: PPM)
  • ST range: 90
  • TH range: 45(F: 30;B:15)
  • Charger port: yes
  • Power: 3.7V(800mAh)
  • ANT length: 26mm
  • Size: 156*94*223mm
  • Color: black

Include:

  • FLYSKY GT3B Transmitter (1 pc)
  • FLYSKY FS-GR3E Rceciver (1 pc)
  • Bushings of Antenna (1 pc)
  • Line of Code (10 pcs)
  • CD-ROM (1 pc)

Power HD High Speed Metal Gear Analog Servo For 1:10 Buggy RC Car #HD-9001MG --2 pcs--


Description:

This is the Power HD High Speed Metal Gear Analog Servo For 1:10 Buggy RC Car #HD-9001MG


Feature:

  • For: 1:10 Buggy RC Car & 1:14 Tractor Trucks
  • Material: Metal Gear and Plastic Case
  • Color: Black
  • Fit Futaba Servo Horn

Specification:

  • Model: Analog Servo—HD-9001MG
  • Speed: 0.14sec/60°
  • Torque: 9.8kg.cm
  • Storage Temperature: -20℃~55℃
  • Supply voltage: 6.0V
  • Length: 40.7mm
  • Width: 20.5mm
  • Height: 39.5mm
  • Weight: 56g

Include:

  • Power HD High Speed Metal Gear Analog Servo For 1:10 Buggy RC Car #HD-9001MG (2 pcs)


This is the Power HD High Speed Metal Gear Analog Servo For 1:10 Buggy RC Car #HD-9001MG

Speed Passion Reventon Stock Club Race Brushless ESC Metal Black for 1/10 RC Car #SP000048


Description:

The brand new Reventon Stock Club Race system will redefine the perfect solution for club and spec racing. The non-adjustable software proves to the world that the Reventon Stock Club Race ESC is the only ESC that's needed for any type of racing without spending valuable on-track time for inspections. The built in no timing software provides equal performance and low costs which are ideal to grow new classes and attract new racers. The all new full size heatsink design provides greater heat dissipation working with the high speed fan results in cooler ESC temperatures when racing at the limit.

Feature:

  • For: 1/10 Scale On Road / Off Road RC Car.
  • Color: Metal Black
  • Supports up to 9.5T motors with 2 cell lipo
  • Adjustable voltage cut off
  • DRRS throttle profile setting
  • Optional Wifi/Bluetooth connection
  • Optional on-board voltage reading
  • Optional ESC temperature reading
  • ESC parameter adjustments via the one touch button

Specification:

  • Length: 33mm
  • Width: 33mm
  • height: 19mm
  • Continuous/Burst Current:40A/250A
  • Resistance: 0.0005 ohm
  • Battery: 4-9 Cell Nickle/2 Cell LiPo/2-3 Cell LiFe
  • BEC Output: 6.0V/BEC 2A
  • ESC Type: Sensored/Sensorless
  • Motor Type: Sensored/Sensorless
  • Motor Limit: 9.5T Max @ 7.2/7.4V
  • ESC Fan: 25mm
  • Supports Wi-Fi Module Software: Yes (optional WiFi Module sold separately
  • Supports Smart LED Program Card: Yes (optional Smart LED Program card sold separately)
  • Supports 2.4G held-set for program setting: No
  • Supports Bluetooth Module Setting: Yes (optional Bluetooth Module sold separately
  • Racing Program Setting: Stock 0 "Zero Timing Software"

Include:

  • Reventon Stock Club Race ESC (1 pc)
  • 25mm Fan (1 pc)
  • Wire (1 set)
  • Instruction (1 pc)

Yeah Racing Modified 540 Sensored Brushless Motor 10.5T 3600kv For 1:10 Onroad & Offroad RC Car #MT-0008


Description:

  • New adjustable timing will allow you to have Smooth Low. Mid Power Kick. or Overall all Smooth Power. HIGH POWER CURRENT PLUG IN system FOR BRUSHLESS MOTOR.

  • Feature:

    • Adjustable timing
    • Hand-wound for maximum copper fill
    • High purity copper windings to maximize conductivity
    • Sensor-based for excellent torque and low speed drive-ability
    • CNC machined heat sink
    • Powerful sintered neodymium magnet
    • Precision engineered for maximum energy conversion
    • Super smooth start up
    • All motor is factory tested to ensure proper performance

    Specification:

    • Design: Sensored
    • Size: 540
    • Turns: 10.5T
    • Input voltage: Li-Po 2-3S
    • KV (RPM/volt): 3600
    • Shaft Diam: 3.17
    • Build-in Fan: No

    Include:

    • Yeah Racing Modified 540 Sensored Brushless Motor 10.5T 3600kv For 1:10 Onroad & Offroad RC Car #MT-0008 (1 pc)
    • Sensor Cable (1 pc)
    • Yeah Racing YA-0180 Tornado High Speed Cooling Fan 30 x 30mm (1 pc)
    • Manual (1 pc)

    Manual:

    Yeah Racing Modified 540 Sensored Brushless Motor Hackmoto EVO

      Customer Reviews

    1. There are currently no product reviews.

    Write a Review

    Customers who bought this product also purchased

    3Racing One Way Pulley 38T For Sakura Zero SAK-59/A
    3Racing One Way Pulley 38T For Sakura Zero SAK-59/A
    USD$2.56
    3Racing 48 Pitch Spur Gear 80T For Cactus CAC-114
    3Racing 48 Pitch Spur Gear 80T For Cactus CAC-114
    USD$2.10
    Traxxas (2080) Waterproof Micro Servo for Traxxas 1/16 E-Revo and Slash VXL Vehicles
    Traxxas (2080) Waterproof Micro Servo for Traxxas 1/16 E-Revo and Slash VXL Vehicles
    USD$29.00USD$24.99
     
    Manufacturers
    Top Brands

    rcmart traxxasrcmart rpm

    rcmart 3racingrcmart Speed Passion

    rcmart 3racingrcmart Speed Passion

    rcmart Yeah Racingrcmart Pro-Line

    rcmart Gmade Crawler GS01rcmart Xtra Speed

    rcmart hobby wingrcmart skyrc

    rcmart orcarcmart MST Drift Tire Wheel RC

    rcmart GPMrcmart Xray

    rcmart Team Associatedrcmart orca

    rcmart Tamiyarcmart ABC Hobby Body

    rcmart Novak ESC Motor Comborcmart Jconcepts

    rcmart Flash-Sale-93th-170323

    rcmart Exclusive Special Offer GPM Racing 400 days Warranty








    rcmart Reduced Shipping Save Big weekly deals
    Subscribe
    rcmart crawler Accessories
    rcmart Xpress Xpresso K1 K66
    rcmart 3racing D4 AWD hop up parts
    rcmart 3racing D4 RWD hop up parts
    rcmart Axial yeti hop up parts
    rcmart Gmade GS01 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart traxxas e-revo
    rcmart traxxas summit
    rcmart xray t4
    rcmart blog RC NEWS
    Share Product
    Share on Facebook Share on Twitter Share on Digg Share via E-Mail
    tick
    2 items are added to shooping cart
    Order Qunatity:
    Order Total: USD$