Phone Order Support: US +1(626)404-7382 | UK +44(020)8133-9382 | HK +(852)2858-6382

  1. 3Racing CACTUS 1/10 2WD Buggy w/ Motor Waterproof 60A ESC Servo 2.4Ghz Radio Combo Set #CB0765
    [CB0765]

    Our Price:  Low Price: USD$283.10

    Stock: Out of Stock!

    Buy this item and earn 283 points valued at USD$1.13.

    Write a Review
    Quantity:
     

3Racing CACTUS 1/10 2WD Buggy w/ Motor Waterproof 60A ESC Servo 2.4Ghz Radio Combo Set #CB0765


Combo Include:

  • 3Racing CACTUS 1/10 2WD RC Racing EP Buggy #KIT-CACTUS
  • Xtra Speed 2 Channel 2.4GHz Radio Set w/ Waterproof Receiver for RC Car Buggy Boat #T3816A
  • Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP
  • FEETECH Digital Metal Gear HV Servo (High Torque) with Heat Sink for RC Car / Boat #FT5614M
  • Tamiya (#53696) Super Stock Motor TZ

3Racing CACTUS 1/10 2WD RC Racing EP Buggy #KIT-CACTUS


Description:

3Racing introduces their entry into the hotly contested 2WD electric off road buggy class, the "Cactus".

Built from the accumulation of over 18 months of research and development, prototyping, testing and driver feedbacks, the result is a buggy that’s competitive straight out of the box at a reasonable price due to our improvements in the manufacturing processes.

The Cactus is fully adjustable to adapt to any track conditions, the kit includes all the parts need for Mid Motor 4 Gear Gearbox setup or the traditional Rear Motor 3 Gear Gearbox setup.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


The Cactus in Rear Motor drive configuration


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Machined Anodized Alum Pivot Pin Brace/Stiffener
- No E clip design throughout.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Rear Anti Roll Bar Mount (Anti Roll Bars not included)
- Replaceable Rear Pivot Pin brace allows rear toe and anti squat adjustments.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Wide Rear Wheel Hubs
- Minimizes axle vibrations and toe angle variations .
- Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Industry standard Double Slipper Clutch
- Slipper Pad Housing made from machined hard coated 7075 Alum.
- Machined Anodized 7075 Alum Motor Mount.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Impact resistant composite Motor Guard


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


12.5mm Big Bore Shocks
- Composite Shock Caps with Oil Bleed Holes.
- PTFE Coated Threaded Alum Shock Bodies.
- Titanium Nitride Coated Shock Shafts.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Front and Rear 12mm Wheel Hex adaptors included


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Front Suspension
- Trailing Axle Spindles.
- Oversized 5x10x4 Front Spindle Bearings.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Carb Forward High Downforce body


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Molded Slipper Clutch dust guard with easy access hatch rubber sealed hatch


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Stiff Composite Front and Rear Arms with Reinforcing ribs


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Long Wheelbase Super Narrow Chassis molded composite chassis


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Steering
- Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
- Servo horn integrated adjustable servo saver.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Integrated Chassis Wiring Tunnels


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Main Chassis
- Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor only).
- Centralized ESC Mounting Graphite Plate.


3Racing 1/10 CACTUS 2WD Buggy Racing Car EP #KIT-CACTUS


Oversized Ball Caps throughout


*Photos and descriptions depicts pre-production prototype, final production kit may feature minor updates and improvements.


Feature:

  • 2.6 Internal Reduction Gearbox.
  • Rear Alum Forward Pivot Pin Mount.
  • Rear Sway Bar Mounts.
  • Titanium Nitride Coated Shock Shafts.
  • CNC Machined POM Shock Pistons and Shaft Liners.
  • Oversized Rear Hub Bearings.
  • Metric Hardware all round.
  • Wide Rear Hub minimizes axle vibrations and toe angle variations.
  • Industry standard Double Padded Slipper Clutch.
  • CNC Heatsink Motor Plate.
  • Body and Tire Sets included.
  • Fully Ball Raced.
  • Rebuildable Universal Driveshafts with bearing captured driveshaft pin design.
  • Impact resistant composite Motor Guard.
  • No E Clips pivot pins design.
  • Alum Front Arm Pivot Pin Stiffener.
  • Composite Shock Caps with Oil Bleed Holes.
  • PTFE Coated Threaded Alum Shock Bodies.
  • Front and Rear 12mm Hex wheel adaptors.
  • 12.5mm Big Bore Shocks.
  • Carb Forward High Downforce body.
  • 3 Gear Rear and Mid Motor 4 Gear Gearboxes included.
  • Stiff Composite Front and Rear Arms with Reinforced ribs.
  • Super Narrow Chassis.
  • Oversized 5x10x4 Front Spindle Bearings.
  • Trailing Axle Spindles.
  • Optimised Ackermann Steering System minimizes any unwanted inside wheel play at maximum steering lock.
  • Designed for Centralized Electronic Components Mounting.
  • Dual ESC Mounting Positions.
  • Composite Rigid Battery Mount Plate with Flex Control System (Rear Motor Drive).
  • Integrated Chassis Wiring Tunnels.
  • Composite Flex Optimized Chassis to provide the highest traction on low to medium bite tracks.
  • Accommodates both standard and shorty Lipo batteries.
  • Long wheelbase optimized for brushless motors and Lipo power.
  • Oversized Ball Caps.
  • Adjustable Heavy Duty Ball Differential.
  • 80T 48 Pitch Spur Gear.

Vehicle Specification:

  • Length: 410mm MAX
  • Width: 250mm
  • Weight: Approx 1600g
  • Wheelbase: 250mm

Include:

  • 3Racing 1/10 CACTUS 2WD Buggy Racing Car EP (1 Set)
  • Decals
  • Instruction

Require:

  • Motor
  • ESC
  • Radio Set
  • Servo
  • Battery
  • Charger

Xtra Speed 2 Channel 2.4GHz Radio Set w/ Waterproof Receiver for RC Car Buggy Boat #T3816A


Description:

This is an Xtra Speed 2 Channel 2.4GHz Radio Set w/Receiver. This 2 Channel Radio Systems offer more advanced features that car, truck and boat racers desire - in particular Steering Dual Rate, Steering End Point Adjustment (EPA) Left/Right and Throttle EPA.

At a competitive price, this radio system allows users to adjust steering and throttle settings. Furthermore, the Steering/Throttle End Point Adjustment (EPA) limits servo travel for more control and prevents servo damage.


Feature:

  • For: RC Car / RC Boat
  • Material: Plastic
  • Color: Black

Transmitter:

  • RF power: less than 10DBm
  • 2.4G system
  • Code type: GFSK
  • Sensitivity:1024
  • Low voltage warning: yes (less than 8.5V)
  • Charge port: yes
  • ANT length: 3.5cm
  • Length: 180mm
  • Width: 100mm
  • Height: 260mm
  • Weight: 331g
  • In-put Power: 12VDC ( "AA" x 8 )

Include:

  • Xtra Speed 2 Channel 2.4GHz Radio
  • Waterproof Receiver (1 pc)
  • Manual (1 pc)

Require:

  • "AA" Battery (8 pcs)

Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC #ESC-1060WP


Description:

After the revolutionary Hacktronic ESC introduction, Yeah Racing is now introducing the almighty Tritronic 1/10 Waterproof Brushed 60A Electronic Speed Controller ESC. It is water-proof & dust-proof, making it almighty to race under all weather condition. It has 3 running modles compatible to various vehicles and multiple protections in case of low voltage, over-heating or Throttle signal loss.


Feature:

  • For: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
  • Water-proof and dust-proof, suitable for all-weather condition races.
  • Small size with built-in capacitor module.
  • Fwd/Rev/Br running mode fits for various vehicles (Fwd =Forward, Br=Brake, Rev=Reverse).
  • Great current endurance capability.
  • Great built-in BEC output capacity.
  • Automatic throttle range calibration, easy to use.
  • Easy to set the ESC parameters with jumpers.
  • Multiple protections: Low voltage cut-off protection for battery / Over-heat protection / Throttle signal loss protection.

Specification:

  • Model: ESC-1060WP
  • Fwd. Cont. / Peak Current: 60A /360A
  • Rev. Cont. / Peak Current: 30A /180A
  • Voltage Range: 2-3S Lipo or 5-9 NiMH
  • Cars Applicable: 1/10: Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
    • 2S Lipo or 6 NiMH
      • 540 or 550 Size Motor: ≥12T Or RPM<30000 @7.2V
    • 3S Lipo or 9 NiMH
      • 540 or 550 Size Motor: ≥18T Or RPM< 20000 @7.2V
    • 4S Lipo or 12 NiMH
      • Not Available
  • Resistance: Fwd 0.001Ω, Rev 0.002Ω
  • BEC Output: 2A/5V (Linear Mode)
  • PWM Frequency: 1KHz
  • Dimension / Weight: 36.5*32*18 / 39g
  • Cooling Fan: Without cooling fan
  • Running Modes: Forward/Reverse/Brake, Forward/Brake, Forward/Reverse

Include:

  • Yeah Racing Tritronic 1/10 Waterproof Brushed 60A ESC (1 Set)
  • Manual (1 pc)

FEETECH Digital Metal Gear HV Servo (High Torque) with Heat Sink for RC Car / Boat #FT5614M


Description:

This is a FEETECH Standard Digital Metal Gear HV Servo #FT5614M


Feature:

  • For: RC Airplane/Car/Boat
  • Standard digital Titanium gears servo、2BB
  • Coreless motor、Aluminium middle hull
  • Waterproof
  • Operating Voltage: 2-cell Li-Po power
  • Dead band width: 2usc
  • Interface: (like JR)

Specification:

  • Model:FEETECH Standard Digital Metal Gear HV Servo #FT5614M
  • Speed: 0.13sec/60° (7.4V) / 0.11sec/60° (8.4V)
  • Torque: 12.1kg.cm/168.0 oz.in (7.4V) / 14.5kg.cm/201.4oz.in (8.4V)
  • Weight: 56g(1.41oz)
  • Size: 40.2*20.0*38.6mm

Include:

  • Servo (1 pc)
  • Servo Arm(1 Bag)

Optional items:

Click the links below to buy these optional items:

Manual (Programm Connector For FT Programmable Servo):

Manual (Direct Power Supply Connector with BEC):


  • A high performance motor for electric radio control car use.
  • A high torque motor is designed for endurance race or low speed track.
  • Can be disassembled for maintenance. Features standard brushed.
  • Blue anodized end bell with brush dampers.
  • Features terminal heat sink and detachable chip capacitor.
    [Caution] The rotation direction of the motor is counter-clockwise when viewed from the gear end.

    Specification:

  • No. of turn: 23 turns
  • Proper voltage range: 7.2V
  • RPM at no load: 26,500rpm (7.2V)
  • Best efficiency: 78%
  • Torque at best efficiency: 500gf.cm (7.2V)

    ROTATION DIRECTION
    make sure the rotation direction of the motor is correct. The rotation direction of the motor is counter-clockwise when viewed from the pinion gear end. Running the motor in the opposite direction will result in reduced performance.

    REPLACING BRUSHES

  • Check brushes after use 10-15 full battery packs.

    CAUTION WITH RUNNING THE MOTOR

  • Make sure to replace plastic bearings with ball bearings. Plastic bearings cannot endure motor rotation.
  • Continuous running will damage the motor. Let the motor cool after each full battery run.
  • Never overload the motor. Make sure that all the gears and rotating parts move smoothly to prevent motor burn out.
  • Never cover the motor. Covering will hinder heat dissipation resulting in damage.
  • If motor gets damaged or over-heats, performance will deteriorate.
  • Periodically disassemble, clean and maintain motor after running it.
  • Use only genuine Tamiya spare parts.
  • Communtator Cleaning Brush Set (53486) is recommended for cleaning. Replace the brush on one side (+ or -) and run the motor without load.
    1. Customer Reviews

    2. There are currently no product reviews.

    Write a Review

    Customers who bought this product also purchased

    SKYRC EN5 AC Charger Nimh/NiCad 4S-8S 50W 5A Built-in Adapter SK-100051-02
    SKYRC EN5 AC Charger Nimh/NiCad 4S-8S 50W 5A Built-in Adapter SK-100051-02
    USD$23.90
    Intellect (50006) NiMh Battery SC H-Stick Pack 7.2V 5000mAh For RC Car
    Intellect (50006) NiMh Battery SC H-Stick Pack 7.2V 5000mAh For RC Car
    USD$39.90USD$27.90
    Manufacturers
    Top Brands

    rcmart traxxasrcmart rpm

    rcmart 3racingrcmart Speed Passion

    rcmart 3racingrcmart Speed Passion

    rcmart Yeah Racingrcmart Pro-Line

    rcmart Gmade Crawler GS01rcmart Xtra Speed

    rcmart hobby wingrcmart skyrc

    rcmart orcarcmart MST Drift Tire Wheel RC

    rcmart GPMrcmart Xray

    rcmart Team Associatedrcmart orca

    rcmart Tamiyarcmart ABC Hobby Body

    rcmart Novak ESC Motor Comborcmart Jconcepts

    rcmart Flash-Sale-93th-170323

    rcmart Exclusive Special Offer GPM Racing 400 days Warranty








    rcmart Reduced Shipping Save Big weekly deals
    Subscribe
    rcmart crawler Accessories
    rcmart Xpress Xpresso K1 K66
    rcmart 3racing D4 AWD hop up parts
    rcmart 3racing D4 RWD hop up parts
    rcmart Axial yeti hop up parts
    rcmart Gmade GS01 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart Axial SCX10 hop up parts
    rcmart traxxas e-revo
    rcmart traxxas summit
    rcmart xray t4
    rcmart blog RC NEWS
    Share Product
    Share on Facebook Share on Twitter Share on Digg Share via E-Mail
    tick
    2 items are added to shooping cart
    Order Qunatity:
    Order Total: USD$